Rehau PVC edgebanding 302164-305 15/16 x .018

Rehau PVC Edgebanding 302164-305 For Clean Edges

Rehau PVC edgebanding 302164-305 is a PVC edge banding from Rehau, Inc. that covers and finishes exposed panel edges, giving casework, shelving, and similar projects a consistent finished edge. The SAP description specifies 15/16 x .018 CP60493 EMB LAC 600FT, so this roll is sized for standard panel edges where a narrow, low-profile band is preferred to keep edges protected without adding bulk. The 15/16 inch width gives coverage across typical panel thickness with a bit of tolerance for trimming, helping installers achieve a flush edge line. The .018 inch thickness keeps the banding slim, which supports tight corners and clean transitions on cabinet and furniture parts. The CP60493 EMB LAC designation identifies a specific embossed lacquer appearance, so matching to the intended surface look can be controlled at the specification stage.

Key Edgebanding Details That Support Your Work

• The 15/16 inch width specified in 15/16 x .018 CP60493 EMB LAC 600FT covers common panel thickness, so a single pass can hide substrate edges and leave enough material for finish trimming.
• The .018 inch thickness called out in the description keeps the edgebanding light and flexible, allowing it to follow gentle curves and corners while minimizing the step between face surface and edge.
• The CP60493 EMB LAC designation defines a particular embossed lacquer style, giving designers and shops a consistent visual reference when setting standards across multiple cabinets or furniture runs.
• The 600FT length in the SAP description provides a continuous roll for longer production runs, reducing changeovers and helping maintain uniform edge appearance from part to part.
• The Rehau PVC material and edge banding class tie this product to Rehau, Inc. edgebanding systems, supporting shops that standardize on a single brand for repeatable color and texture selection.

Edgebanding Size And Finish For Straightforward Fit

The 15/16 x .018 dimension on this Rehau PVC edgebanding sets expectations for how it fits on standard panel edges, so fabricators can plan trimming operations around a known overhang. That width gives enough coverage to span the panel edge and slight alignment variations while still trimming back to a tight line. The .018 inch thickness keeps the edge profile modest, supporting flush-top builds where a thicker edge could stand proud. The CP60493 EMB LAC designation indicates an embossed lacquer style, so the finished edge will present a defined texture and sheen that matches the chosen reference, helping projects maintain a unified appearance across doors, drawer fronts, and panels.

Where This Rehau PVC Edgebanding Excels In Use

Using Rehau PVC Edgebanding 302164-305 On Panels

This Rehau PVC edgebanding, identified as 15/16 x .018 CP60493 EMB LAC 600FT, is positioned for edging panel-based components where a PVC edge banding is specified. The 15/16 inch width lines up with common panel thickness ranges, so it can be applied to cabinet sides, shelves, and fronts with a practical trimming margin. Because the edgebanding is part of the Edge Banding product class, it serves as the transition between the panel face and the exposed core, providing a defined boundary that supports both appearance and edge protection. The CP60493 EMB LAC reference gives a consistent appearance target, allowing shops to apply this same banding across multiple units that share the same surface scheme.

Why The 15/16 x .018 Format Supports Consistent Results

The specified 15/16 x .018 size on Rehau PVC edgebanding 302164-305 shapes how the banding behaves once applied and trimmed. The 15/16 inch width offers enough overhang to tolerate minor registration differences along the panel edge, then trim back to a straight, flush line that hides the substrate. The .018 inch thickness keeps the material lean, helping reduce the visual step where the edge meets the panel face and supporting a smooth feel along doors and drawer fronts. Because the roll length is 600FT per the SAP description, shops can run multiple cabinets or a full project phase from a single roll, which helps keep the edge color and texture consistent from the first piece to the last in that run.

Common Questions About Rehau PVC Edgebanding 302164-305

Select Rehau PVC Edgebanding 302164-305 For Defined Edges

Rehau PVC edgebanding 302164-305, with its 15/16 x .018 CP60493 EMB LAC 600FT specification, offers a clearly defined size, material, and appearance for finishing panel edges. That clarity lets shops plan edge work around known dimensions, texture, and roll length when specifying projects through Wurth Baer Supply.