Rehau PVC edgebanding gives you a dedicated edge banding solution under the Rehau, Inc. brand, so your panels can be finished with a consistent material from a known manufacturer. The product name Rehau PVC Edgebanding, 302164-324 identifies this as a specific Rehau edge banding that can be matched again on repeat projects. The product class Edge Banding defines its role as a finishing strip for exposed panel edges, which helps you turn raw board edges into a clean, usable surface. By specifying a Rehau PVC edgebanding, you are working with a defined material type that suits typical woodworking and cabinet environments where PVC edge treatments are preferred.
The 15/16 inch width in the SAP description 15/16X.018 CP20746 EMB LAC 600FT gives you enough coverage to span common panel thicknesses while still leaving light overhang for trimming, which supports neat edges after machining. The .018 inch thickness described in the same SAP line keeps the Rehau PVC edgebanding slim, so cutters and trimmers can bring it flush to the panel face with minimal resistance and reduced adjustment between passes. The PVC material identified in the product name provides a stable edge banding type that works well with typical edgebanding and trimming setups used in woodworking shops.
The category Miscellaneous|Edgebanding places this Rehau PVC edgebanding in the general edgebanding group used around woodworking, so it suits projects that rely on edge treatment for exposed board edges. The product class Edge Banding confirms its role at the perimeter of panels, where it finishes raw substrate to create a more uniform appearance on cabinets, casework, or similar assemblies. With a 15/16 inch width per the SAP description 15/16X.018 CP20746 EMB LAC 600FT, this material is sized for edges around standard sheet goods, which helps it cover the full edge and avoid visible substrate shoulders. The 600FT length in that same SAP description supports runs of repeated parts, so production shops can apply the same Rehau edgebanding across many panels before transitioning to another coil.
The 15/16X.018 sizing in the SAP description 15/16X.018 CP20746 EMB LAC 600FT ties installation settings directly to the material, because your edgebander and trimmer can be dialed to a .018 inch PVC thickness and a 15/16 inch feed width for predictable results. The CP20746 reference inside that SAP description serves as a design and style code, so estimators, engineers, and installers are all referring to the same appearance and finish when they specify this Rehau PVC edgebanding. The EMB LAC portion of the SAP description further refines the exact variant, which helps reduce mix-ups between similar-looking edge materials during purchasing or job staging. The manufacturer part number 302164-324 connects your purchase directly to Rehau, Inc., giving your documentation a clear link back to the original Rehau PVC edgebanding specification for reorders or future matching work.
Rehau PVC edgebanding, 302164-324 is classified as Edge Banding, so it is used to finish exposed panel edges in woodworking and cabinet projects that require a PVC edge treatment.
The SAP description 15/16X.018 CP20746 EMB LAC 600FT states a 15/16 inch width, allowing the banding to fully cover common panel edges with slight overhang for trimming.
The SAP description lists .018 inch thickness, so the Rehau PVC edgebanding presents a slim edge that trims flush easily and works well with standard edgebander cutter settings.
The SAP description 15/16X.018 CP20746 EMB LAC 600FT specifies 600FT length, providing enough material to edge multiple cabinets or casework runs without frequent coil changes.
The CP20746 EMB LAC code in the SAP description identifies a specific Rehau PVC edgebanding variant, helping shops and purchasers repeatedly order the same style and appearance.
The product lists Rehau, Inc. as the brand and manufacturer, so the 302164-324 PVC edgebanding aligns with Rehau product standards and identification systems.
The Rehau PVC edgebanding, 302164-324 from Wurth Baer Supply combines a defined 15/16X.018 CP20746 EMB LAC 600FT specification with a clear manufacturer part number for repeatable ordering and installation. By choosing this Edge Banding, you tie your panel edges to a specific Rehau PVC material that can be documented on drawings, scheduled by code, and matched on future work wherever the same width, thickness, and variant are required.
Sold In: 1 Roll