Rehau PVC edgebanding 302164-328 is a PVC edge banding product from Rehau, Inc. that covers and finishes raw panel edges, so cabinet and furniture projects present a uniform, workable edge instead of exposed core material. The 15/16 inch width stated in the SAP description gives coverage for standard 3/4 inch panels with room for trimming, which helps installers flush the edge without risking chip-out on the face. The .018 inch thickness noted in the description provides a low-bulk edge, so doors, drawer fronts, and panels maintain clean lines while still gaining a defined edge detail. The CP20930 EMB LAC reference identifies a specific finish and embossing combination, which keeps color and texture consistent when matching other components ordered to the same code. The 600FT length described creates a long continuous run, which reduces changeovers on repetitive jobs and supports efficient edge processing in a shop environment.
The 15/16 inch width cited in the SAP description gives installers extra material beyond a 3/4 inch panel edge, so trimming stations can fine-tune the edge flush without risking damage to the laminate or veneer face. The .018 inch thickness referenced keeps the banding slim, which simplifies corner detail work and minimizes the transition that must be flushed during setup on hand trimmers or automatic edgebanders. Because the description identifies this as PVC edgebanding, it aligns with tooling, feed pressures, and glue systems already set up for PVC materials, which helps maintain consistent adhesion and cut quality across different PVC runs. The CP20930 EMB LAC identifier marks a specific appearance series, so once machinery is dialed in for that finish look, repeat orders under the same code support consistent results job after job.
The Category and Product Class entries show this item as edgebanding for woodworking-related applications, so it functions as the edge treatment on cabinets, furniture, and similar panel-based builds. The 15/16 inch width noted allows coverage of standard casework materials, so installers can apply it to common panel sizes used in shops without changing edge banding width for each run. Being identified as PVC edgebanding means it suits environments where plastic edges are typical, such as commercial and residential cabinetry, providing a stable edge layer over the core material. The CP20930 EMB LAC designation ties to a defined aesthetic family, so when this code is used across door fronts, shelves, and case edges, the visible banding has coordinated appearance from part to part on a project. The 600FT length in the description supports continuous production work, which is helpful when many cabinet components share the same edge detail on a job.
The stated 15/16 inch width gives consistent overhang on 3/4 inch panels, so once trimmers and scrapers are dialed in, operators can repeat the same process across many parts with predictable results. The .018 inch thickness referenced in the product description keeps the edge profile thin, which reduces the amount of material tooling must remove and supports smoother passes that maintain the face surface. Because this product is specified as PVC edgebanding, it behaves consistently with other PVC stock in terms of feed, trimming, and scraping, which helps maintain setup efficiency on automatic banders. The CP20930 EMB LAC finish code links each roll to a specific visual standard, so when shops repeat that code on reorder, they maintain color and texture continuity on repairs, additions, or phased installations. The 600FT length listed also limits roll change interruptions, supporting steady throughput and uniform edge quality on longer runs.
Rehau PVC edgebanding 302164-328 uses a 15/16 inch width, covering typical 3/4 inch panels with extra material for trimming, which supports clean, flush edges after machining.
Rehau PVC edgebanding 302164-328 has a .018 inch thickness, creating a slim profile that limits edge buildup and helps maintain tight, consistent gaps around doors and drawer fronts.
Rehau PVC edgebanding 302164-328 uses the CP20930 EMB LAC designation, signaling a specific finish and embossing group so parts ordered under this code share visual characteristics.
Rehau PVC edgebanding 302164-328 is described at 600FT length, supporting long, uninterrupted edgebander runs and reducing changeovers on repetitive cabinet or furniture parts.
Rehau PVC edgebanding 302164-328 is identified as PVC edgebanding, so it works with machinery, blades, and glue systems set up for standard PVC edge materials.
Rehau PVC edgebanding 302164-328 uses the CP20930 EMB LAC identifier, which links rolls to a defined finish family, supporting consistent appearance across multiple cabinet parts.
Rehau PVC edgebanding 302164-328 combines a 15/16 inch width, .018 inch thickness, PVC composition, CP20930 EMB LAC finish code, and 600FT length to support edge treatment on cabinet and furniture projects. When your next run calls for a PVC edge in this defined size and finish family, this Rehau edgebanding offers dimensions and identification that align with common 3/4 inch panel work and repeatable shop setups.
Sold In: 1 Roll