Rehau PVC edgebanding 302164-329 15/16x.018 600FT

Rehau PVC Edgebanding 302164-329 For Clean Edges

Rehau PVC edgebanding 302164-329 identifies this product as a PVC edge banding solution from Rehau, Inc., so it gives cabinet and fixture edges a finished look that matches your panel setup on production runs. The product class designation as edge banding defines its role as a dedicated edge treatment, turning raw board edges into durable, job-ready surfaces on cabinets, shelving, and casework. The SAP description "15/16X.018 CP20941 EMB LAC 600FT" shows that the banding is supplied in a 15/16 inch width, so it covers common 3/4 inch panels with overhang available for trimming. The .018 inch thickness supports routine edgebanding workflows where a thin PVC layer is preferred for clean trimming and minimal edge buildup. The 600FT length in the description supports longer runs or multiple smaller projects from a single roll, which helps keep color and texture consistent across a job.

Key Edgebanding Details That Support Your Work

• The 15/16 inch width in the SAP description allows coverage of typical 3/4 inch substrates with enough excess to trim flush, which helps installers produce straight, clean edges along doors, drawer fronts, and panels.
• The .018 inch thickness called out in the description defines it as a thin PVC banding, so it responds well to standard edge banding trimmers and routers, reducing resistance and helping maintain a smooth transition from face to edge.
• The CP20941 reference in the description serves as a specific decor or pattern code, which supports consistent visual matching when repeating this edge detail across multiple cabinets, panels, or replacement parts on future service work.
• The "EMB LAC" wording in the SAP description indicates an embossed lacquer surface, giving the edge a textured, lacquered finish that visually complements many panel surfaces while helping disguise minor handling marks along the edge.
• The 600FT length listed in the description provides a long continuous run of banding, which is useful on production or large projects because it reduces roll changes and keeps the color and finish uniform along extended cabinet or fixture runs.

Edgebanding Size And Finish For Straightforward Installation

The SAP description "15/16X.018 CP20941 EMB LAC 600FT" confirms the banding width at 15/16 inch, giving installers a predictable overhang on standard 3/4 inch material so trimming jigs and flush cutters can work efficiently. The .018 inch thickness in that same description supports established PVC edgebanding techniques, because the banding forms a low-profile edge that blends smoothly with laminate or melamine surfaces after trimming. The embossed lacquer detail from "EMB LAC" identifies a textured, lacquered surface, so the banding presents a finished face right off the roll, helping the edge read as part of the panel rather than a separate strip. The 600FT length referenced in the description fits well into shop or onsite workflows that favor fewer roll changes while running multiple doors, drawer fronts, or shelves in sequence.

How This PVC Edgebanding Fits Real Projects

Where Rehau PVC Edgebanding 302164-329 Is Used

The product class listing as edge banding places this Rehau PVC edgebanding 302164-329 squarely in cabinet, fixture, and general woodworking use, where exposed core edges need a matching PVC finish. The 15/16 inch width in the SAP description suits common 3/4 inch boards used in carcasses, shelves, and fronts, so installers can standardize on this size for many box and case applications. By specifying .018 inch thickness, the description sets expectations for a thin PVC profile that partners well with typical commercial-grade edgebanders and hand tools, keeping trim passes light and controllable around corners. The CP20941 identifier in the description ties the banding to a particular visual design, which matters when running coordinated work, such as matching doors, end panels, and filler strips across a bank of cabinets or built-ins.

Why These Edgebanding Details Support Consistent Results

The clearly defined 15/16X.018 sizing in the SAP description helps fabricators dial in machine settings because they know the banding width and thickness before cutting panels, which supports repeatable alignment between edge and face. The embossed lacquer surface noted as "EMB LAC" adds a textured, lacquered finish that lets the edge line blend with many laminated or coated panels, helping the finished piece look intentional from every viewing angle. The 600FT roll length in the description supports long, uninterrupted runs on edgebanding machines, reducing color breaks and joints that can otherwise interrupt the appearance on tall cases or continuous shelving. The manufacturer part number 302164-329 and the web description "WBSC - 1432 - RU302164-329" together provide clear identification, which streamlines reordering for repeat jobs or service replacements that must match an existing installation. The Rehau, Inc. brand identification situates this product within a recognized edgebanding line, supporting workflow continuity when shops standardize on a single system for color codes and surface options.

Common Questions About Rehau PVC Edgebanding 302164-329

Select Rehau PVC Edgebanding 302164-329 For Your Run

The SAP description "15/16X.018 CP20941 EMB LAC 600FT" defines width, thickness, surface, and length so you can align this Rehau PVC edgebanding 302164-329 with your cabinet or fixture work. The edge banding product class and PVC construction suit routine woodworking projects where exposed board edges need a coordinated finish. The specific CP20941 code and embossed lacquer surface help maintain a consistent appearance across doors, panels, and trims on the same job. The 600FT roll length supports extended runs on edgebanders or organized bench work, reducing changeovers as you move from part to part.