Rehau PVC edgebanding 302164-330 is a PVC edge banding from Rehau, Inc. that finishes raw panel edges so cabinet and furniture parts present a uniform, workable edge. The 15/16 inch width covers standard panel thicknesses with a bit of overhang, giving room to trim back to a flush edge in the shop. The .018 inch thickness provides a low-profile band that shapes quickly, which helps streamline run-after-run trimming on edge banders or manual setups. The CP21031 designation identifies a specific decor and surface match within the Rehau line, supporting consistent appearance across multiple parts on the same job. The embossed lacquer surface noted in the SAP description adds a textured, lacquered finish that affects how the edge feels and looks against matching faces. The 600 foot length in the SAP description supports longer production runs, reducing changeovers during repeated edging work.
The 15/16 inch width defined in the SAP description gives installers extra coverage beyond many panel thicknesses, which simplifies aligning the band, then trimming top and bottom back to the substrate. The .018 inch thickness shapes easily during trimming and corner detailing, which matters when dialing in flush edges on cabinets, shelving, or similar components. The CP21031 embossed lacquer finish noted in the SAP description produces a specific surface character that affects how the edge transitions to the face, helping maintain a consistent appearance when the matching decor is used on adjoining panels. With a 600 foot length specified, the roll supports extended setup time on an edgebander, so once the machine is tuned for this Rehau PVC edgebanding, multiple pieces can be processed without frequent material changes.
This Rehau PVC edgebanding 302164-330 is classified as edge banding, so it is intended to cover and finish exposed edges on panel-based construction. The 15/16 inch width works across common casework and furniture-grade substrates, providing enough overlap to true the edge after bonding. Because the material is PVC, it interacts predictably with edge banding equipment that is set up for this class of banding, which helps maintain consistent feed, trimming behavior, and surface quality along each edge. The CP21031 EMB LAC detail in the SAP description ties this product to a particular embossed lacquer decor, so when panels are prepared in that coordinated finish, this banding helps the edge read as part of a single, continuous surface. Over a 600 foot length, the banding supports repetitive panel runs where the same finish must appear on every exposed edge.
The .018 inch thickness given in the SAP description influences how trimming, scraping, and light sanding behave, allowing installers to bring the edge flush without removing excessive material. This thin profile also affects corner transitions, helping maintain a defined line where faces and edges meet on casework. The embossed lacquer surface identified by EMB LAC in the SAP description means the banding arrives with a textured, lacquer-like appearance, so the final edge character is driven by the factory-applied surface rather than in-field finishing passes. The manufacturer part number 302164-330 uniquely identifies this combination of PVC material, CP21031 decor, embossed lacquer finish, and dimensions, which matters when shops need to repeat a job later and match earlier work. The 600 foot SAP length keeps that same specification running through extended production, supporting uniform results across large batches.
Rehau PVC edgebanding 302164-330 is described as 15/16 inch wide by .018 inch thick, giving coverage and trim allowance for typical panel-based cabinet and furniture components.
The CP21031 EMB LAC detail in the SAP description identifies an embossed lacquer finish and specific decor, guiding shops that need a particular texture and appearance on visible edges.
The 600 foot length mentioned in the SAP description supports longer production runs, so once equipment is set for this banding, many parts can be edged without changing rolls.
The product name specifies PVC, so this 302164-330 edge banding behaves like other PVC edgebanding when feeding, trimming, and finishing on typical woodworking equipment.
This Rehau, Inc. PVC edge banding is in the Edge Banding product class, so it is used on exposed edges of cabinet, furniture, and other panel-based woodworking projects.
The 15/16 inch width stated in the SAP description provides overhang on common panel thicknesses, allowing edges to be trimmed back to a flush, consistent profile after bonding.
The Rehau PVC edgebanding 302164-330 pairs its 15/16 inch by .018 inch size with the CP21031 embossed lacquer surface, aligning dimension and decor for panel-based work. The 600 foot length supports extended runs where that specific Rehau finish must repeat across many edges. For shops standardizing on a coordinated Rehau look, this manufacturer part number 302164-330 provides a defined specification that can be ordered again whenever the same edge appearance and sizing are required on future cabinet or furniture jobs.
Sold In: 1 Roll