Rehau PVC edgebanding 302164-339 is a PVC edge banding from Rehau, Inc. that covers and finishes exposed panel edges, giving casework, cabinetry, or fixtures a consistent, finished look across projects. The 15/16 inch width works with typical 3/4 inch panels, adding coverage for minor overhang while still trimming cleanly during processing. The .018 inch thickness keeps the edge profile slim, which helps panels sit correctly in standard layout dimensions. The continuous 600FT length supports longer production runs or multiple jobs from a single roll, helping maintain the same edge material across a full set of components. As an edge banding within the edgebanding category, it serves as a dedicated solution for closing off raw edges so panels present a uniform PVC edge instead of exposed core material in typical woodworking environments.
This Rehau PVC edgebanding, listed at 15/16 inch wide, provides enough edge coverage during application so installers can apply the banding and then trim flush without exposing the core. The .018 inch thickness limits how much material sits at the panel edge, helping panels keep their planned size as they move through cutting, banding, and assembly stages. With a 600FT length, shops can load this edgebanding for multiple cabinets or fixture runs, applying the same material across doors, sides, and shelves for a uniform panel edge treatment during installation.
This Rehau PVC edgebanding is part of the edge banding product class, so its role is to finish exposed panel edges in woodworking and related projects. The 15/16 inch width is suited to work with common 3/4 inch panel stock used in cabinets, casework, and similar assemblies, giving some overhang to trim back for a clean edge line. As a PVC edgebanding, it pairs well with engineered panels where a PVC edge is preferred over a raw substrate. The continuous 600FT length helps shops run door and panel batches using the same edge material, which supports visual consistency across a run of cabinets or fixtures. The manufacturer part number 302164-339 specifically identifies this variant within Rehau offerings, which supports clear referencing in project documentation and shop setups.
The .018 inch thickness of this Rehau PVC edgebanding influences how the finished edge transitions from face to edge, helping keep the profile subtle so parts stay close to design dimensions in assembly. The 15/16 inch width provides practical working room during edgebanding operations, allowing the banding to be applied slightly proud and then trimmed back for a straight, controlled finish line. Being a PVC material gives the edge a uniform synthetic surface that aligns with typical PVC-based finishes in the woodworking industry, supporting a consistent look across panels. With 600FT available on this product, shops can plan runs knowing the same Rehau edgebanding can be applied across multiple components, helping reduce visual variation from one cabinet or panel to another. The identification as Rehau PVC edgebanding, 302164-339, ties these dimensions and material details to a specific product reference that can be used repeatedly when the same edge profile and appearance are required.
Rehau PVC edgebanding 302164-339 has a width of 15/16 inch, giving working overhang beyond a 3/4 inch panel so the edge can be trimmed back to a clean, straight line.
This Rehau 302164-339 edge banding is .018 inch thick, which keeps the applied edge relatively slim so cabinet doors and panels stay close to planned clearances.
Rehau PVC edgebanding 302164-339 is made from PVC, providing a consistent synthetic edge that coordinates with PVC-based panel and surfacing materials in woodworking projects.
The Rehau PVC edgebanding 302164-339 is specified at 600FT in length, supporting longer cabinet or casework runs with a single continuous material source.
Rehau 302164-339 belongs to the edge banding product class, meaning it is intended to finish and cover panel edges in cabinetry and related woodworking assemblies.
The 15/16 inch width gives extra coverage over a 3/4 inch panel edge, allowing installers to trim back excess and create a controlled, uniform finished edge line.
Rehau PVC edgebanding 302164-339, at 15/16 inch wide and .018 inch thick in a 600FT length, offers defined dimensions and material for edging panels in woodworking projects. These characteristics support consistent edges across cabinets, casework, and similar assemblies. For work that relies on repeatable edge appearance from panel to panel, this Rehau PVC edgebanding provides a clearly identified option within the edge banding category.
Sold In: 1 Roll