Rehau PVC edgebanding 302164-347 identifies this Rehau, Inc. edge banding as a specific PVC option, which helps match it consistently across projects where the same edge detail is required for repeat work. The product class of edge banding defines its role as a finishing strip for exposed panel edges, so it covers raw core material for a more finished appearance in cabinet and woodworking jobs. The SAP description listing 15/16X.018 sets the banding width at 15/16 inch and thickness at .018 inch, which suits common panel thicknesses where a near-full-height edge is preferred without adding bulk. The same SAP description specifies CP40849 EMB LAC, tying this edgebanding to that particular surface and color reference to coordinate with matching board or laminate in that code family. The 600FT length in the SAP description indicates a long run of material for jobs that need continuous, uninterrupted edging across multiple parts.
The 15/16X.018 sizing in the SAP description provides clear guidance for layout and tooling when planning an edgebanding run on case parts. The 15/16 inch width gives a modest margin over a 3/4 inch panel edge, so trimming equipment can remove the excess and leave a flush, square edge without starving coverage. The .018 inch thickness offers a relatively low-profile PVC edge, which affects how much material a trimmer or scraper removes to finish the edge line. The 600FT length noted in the SAP description means a single roll supplies substantial continuous footage, reducing changeovers during larger cabinet or shelving jobs where multiple components use the same edge detail.
The classification under edge banding positions the Rehau PVC edgebanding, 302164-347, for use wherever exposed panel edges need finishing in woodworking environments. The misc/edgebanding category scope connects it to general cabinet, casework, and related projects where PVC edge treatment is preferred over raw core edges. The CP40849 EMB LAC designation in the SAP description links this banding to that specific embossed lacquer style, supporting applications that rely on that surface code for coordinated fronts, shelves, or interior partitions. The 600FT length specified in the SAP description provides enough material for multi-piece runs, which suits production-oriented shops processing repeat parts that all require the same edge detail.
The 15/16X.018 measurement listed in the SAP description defines both the working width and thickness, which directly affects trimming, handling, and edge feel once installed. A 15/16 inch width gives a small but useful overhang on common panel thicknesses such as 3/4 inch, allowing operators to position the band, apply it, and then trim back the surplus for a straight, full-height edge without gaps. The .018 inch thickness contributes to a leaner edge profile, which can help doors and drawer fronts align more closely with adjacent panels when multiple edges meet. The 600FT roll length stated in the SAP description reduces the need to switch rolls during longer production runs, helping maintain consistent feed settings and band orientation from piece to piece. The Rehau, Inc. branding on this PVC edgebanding ties these dimensions and roll length to a specific manufacturer reference, supporting repeat orders when a shop locks in this combination of width, thickness, and surface code.
The 15/16X.018 in the SAP description shows this Rehau PVC edgebanding is 15/16 inch wide and .018 inch thick, which guides edge coverage and trimming expectations on typical panel work.
The 600FT length in the SAP description provides a long run of Rehau PVC edgebanding, supporting multiple cabinet or shelving components without frequent roll changes during production.
The CP40849 EMB LAC reference in the SAP description ties this PVC edgebanding to that specific embossed lacquer style, helping align it with panels using the same code family.
This edge banding is identified by the manufacturer part number 302164-347 and the SAP description 15/16X.018 CP40849 EMB LAC 600FT, which supports precise repeat ordering.
The PVC designation in the Rehau PVC edgebanding name indicates a PVC composition, which defines how the banding behaves under edge-banding equipment and trimming tools in woodworking setups.
The edge banding product class identifies this Rehau item as a finishing strip for exposed panel edges, guiding its use on cabinet, shelving, and similar woodworking components.
The Rehau PVC edgebanding, 302164-347, combines a defined 15/16X.018 size with a CP40849 EMB LAC reference and 600FT length, giving shops a repeatable edge treatment for coordinated projects. The manufacturer part number 302164-347 and SAP description 15/16X.018 CP40849 EMB LAC 600FT provide clear identifiers when aligning existing work or planning new jobs around this specific PVC edge banding. For cabinet, casework, or general woodworking runs that rely on this size and style, selecting this edge banding supports consistent edges across multiple components.
Sold In: 1 Roll