Rehau PVC edgebanding 15/16 x .018 600FT

Rehau PVC Edgebanding For Clean Panel Edges

Rehau PVC edgebanding provides a PVC edge banding solution from Rehau, Inc. that finishes exposed panel edges so cut sheet goods present a uniform, finished edge in cabinet and woodworking projects. The product is classified as edge banding, so it is designed specifically to cover and protect raw substrate edges rather than serve as a structural component. The manufacturer part number 302164-348 identifies this exact configuration, which helps match it with existing runs on jobs where consistent appearance and sizing are critical across multiple panels. The SAP description 15/16X.018 CP40850 EMB LAC 600FT specifies a 15/16 inch wide strip at .018 inch thickness, giving an edge treatment that is wide enough to fully cover typical panel thickness while keeping a thin profile for tight, precise edges. The 600FT length in the description indicates a long run that supports production-oriented work where many parts need the same edge detail.

Key Rehau Edgebanding Details That Matter On Site

• The 15/16 inch width described in 15/16X.018 CP40850 EMB LAC 600FT covers most cabinet and panel edges in a single pass, reducing trimming work and helping maintain a consistent reveal along the entire edge.
• The .018 inch thickness in the SAP description keeps the edgebanding relatively thin, which helps transitions feel smooth at the substrate face and supports precise edge finishing on doors, drawer fronts, and casework.
• The PVC material called out in the product name defines the edgebanding as a thermoplastic product, so it pairs well with typical shop edgebanders that apply heat and pressure in a repeatable way for production runs.
• The 600FT length noted in the SAP description supports long cabinet or fixture jobs where many pieces share the same finish, so installers can handle fewer changeovers and keep color and profile consistent throughout the project.
• The manufacturer part number 302164-348 links this Rehau PVC edgebanding to a specific run, which helps shops reorder the same item for future phases and maintain visual continuity in multi-stage installations.

Edgebanding Size And Material For Straightforward Application

The SAP description 15/16X.018 CP40850 EMB LAC 600FT combines width, thickness, and run length into one reference, so installers know they are working with 15/16 inch wide, .018 inch thick PVC edgebanding suitable for covering standard panel edges in one pass. Because the product is identified as Rehau PVC edgebanding, it is designed for the type of automated or semi-automated edgebanding equipment common in woodworking shops, which results in predictable handling as the material feeds, heats, and presses onto substrate edges. The defined width keeps alignment straightforward when setting guides on an edgebander, and the thin .018 inch profile supports clean trimming operations where knives or flush routers track along the face without excessive material removal.

Using Rehau 302164-348 Edgebanding In Cabinet Work

Where This Rehau PVC Edgebanding Performs Best

The product name Rehau PVC edgebanding and the product class Edge Banding position this item for finishing cabinet, furniture, and general woodworking panel edges where a PVC edge treatment is desired. The 15/16 inch width stated in the SAP description gives coverage suited to typical panels used in casework, so verticals, shelves, and doors can share the same edge material on a job. The .018 inch thickness keeps the banding modest in profile, allowing edges on cabinet doors and drawer fronts to sit flush with surrounding faces after trimming. Because the SAP description specifies 600FT, the roll length supports production environments where many similar parts run through an edgebander, helping one item serve an entire bank of cabinets or a series of fixtures. The manufacturer part number 302164-348 ties the material to this exact specification, which is useful when a shop wants to repeat the same edge treatment on follow-up work or service replacements.

Why These Edgebanding Details Support Consistent Results

The 15/16 inch width in 15/16X.018 CP40850 EMB LAC 600FT gives installers predictable reference points when setting fence positions and trimming tools, so the edge banding can slightly overhang both faces and then be trimmed back to a consistent flush line. The .018 inch thickness in the same description helps knives, trimmers, and scrapers remove a controlled amount of PVC, which contributes to a smooth transition between the edgebanding and the panel face. Identifying the product as PVC in the Rehau PVC edgebanding name indicates a plastic material type that responds predictably to heated application processes, helping shops dial in temperatures and feed rates for repeat jobs using this SKU. The 600FT length supports running long sequences of doors, shelves, or gables with one material specification, helping reduce variation in edge feel and appearance from the first part to the last on a given project.

Common Questions About Rehau 302164-348 Edgebanding

Select This Rehau PVC Edgebanding For Consistent Edges

The Rehau PVC edgebanding with manufacturer part number 302164-348 pairs a 15/16 inch width with .018 inch thickness and a 600FT length, giving shops a defined PVC edge banding for cabinet and woodworking projects that need consistent, repeatable edge treatment across many panels.