Rehau PVC edgebanding 302164-349 is a PVC edge banding product identified as 15/16X.018 CP40851 EMB LAC 600FT, used to finish exposed edges on panels so cut edges are covered and visually consistent across a job. The 15/16 inch width matches standard 3/4 inch panel projects with a small overhang for trimming, which helps installers flush-trim cleanly without exposing the core. The 0.018 inch thickness keeps the edge profile slim, so cabinet and furniture doors close normally while still having a defined, finished edge. The CP40851 identification ties this edgeband to a specific decor reference, supporting color and pattern coordination on repeat projects. The EMB LAC designation signals an embossed and lacquered surface, which provides a textured, finished look that aligns with matching board materials. The 600FT length description supports longer runs or multiple smaller jobs from a single roll, reducing changeouts during production work.
This Rehau PVC edgebanding, described as 15/16X.018, provides a width suited to work with common 3/4 inch panel constructions while leaving a small trim margin, so installers can process edges to a flush finish. The 0.018 inch thickness keeps the band profile subtle, making it suitable where a low buildup at the edge is preferred. As an edge banding product, it is applied along panel edges so that cut substrate is covered, presenting a continuous PVC surface around the perimeter. Its embossed and lacquered (EMB LAC) description defines a surface treatment that supports a finished appearance across cabinet or furniture components using coordinated materials.
This Rehau, Inc. PVC edgebanding 302164-349 is part of the Edge Banding product class, placing it in workflows where exposed panel edges need to be dressed for cabinets, furniture, and casework. The 15/16 inch width lines up well with projects based on 3/4 inch substrates, so installers can apply it to doors, drawer fronts, shelves, and cabinet sides while holding a consistent reveal for trimming. Because the material is specified as PVC, it integrates into woodworking shops already processing PVC edges on panel-based components. The CP40851 designation and the embossed lacquer (EMB LAC) description point to a decor-driven application, where matching the surface character of boards is important across multiple pieces. With 600FT referenced in the description, the roll length supports shops running series production of parts that share the same edge treatment.
The 15/16X.018 sizing of this Rehau PVC edge banding gives installers predictable margins for trimming, which helps produce repeatable, flush edges without leaving the core exposed on 3/4 inch panels. Using a thin, 0.018 inch PVC band contributes to a neat transition from face to edge, supporting consistent reveals when multiple doors or fronts line up across a run of cabinets. The CP40851 identifier anchors the edgeband to a specific decor reference, so when a shop stays with that decor there is visual continuity from job to job. The EMB LAC, or embossed and lacquered surface description, defines a texture and finish level that keeps the edge appearance aligned with coordinating laminates or board finishes throughout an installation. With a 600FT roll length described, fabricators can plan extended cutting and banding sequences around a single material reference, supporting consistent setup and reducing interruptions across larger orders.
The Rehau PVC edgebanding 302164-349 is described as 15/16X.018, meaning it is approximately 15/16 inch wide and 0.018 inch thick for slim yet trimmable panel edges.
The 15/16 inch width provides a slight overhang on 3/4 inch panels, allowing installers to trim back to a flush, clean edge without exposing the underlying core.
EMB LAC in the description indicates an embossed and lacquered surface, giving the PVC edge a textured, finished appearance that aligns with decorative board finishes.
The Rehau 302164-349 PVC edgebanding is used to cover exposed panel edges on cabinets, furniture, and casework so that cut substrates present a continuous PVC surface.
The CP40851 notation ties this edgebanding to a specific decor reference, supporting visual coordination between the edge treatment and matching panel materials.
The 600FT length described allows shops to run longer sequences of banding with the same material, helping maintain consistent edges across multiple components.
The Rehau PVC edgebanding 302164-349, defined as 15/16X.018 CP40851 EMB LAC 600FT, pairs a decor-specific surface with dimensions suited to common 3/4 inch panel work. For cabinet and furniture projects built around the CP40851 decor, this Edge Banding product gives exposed edges a coordinated, embossed, and lacquered PVC finish from the same reference across multiple components.
Sold In: 1 Roll