Rehau PVC edgebanding 302164-360 15/16 x .018

Rehau PVC Edgebanding 302164-360 For Clean Panel Edges

Rehau PVC edgebanding 302164-360 is a PVC edge banding that covers raw panel edges so exposed substrate is hidden and edges look finished on cabinets or casework. The 15/16 inch width gives coverage beyond standard 3/4 inch panels, which allows a small trim margin for flush-routing without exposing the core. The .018 inch thickness keeps the edge banding low profile, which helps match common laminate and panel builds where a thin edge is preferred. The CP60229 reference in the description identifies the specific decor this banding is produced to match, supporting visual continuity across doors, drawer fronts, and panels. The embossed lacquer (EMB LAC) description indicates a textured and coated surface, which supports a more furniture-like edge appearance on visible work. Supplied in a 600 ft length, this continuous coil format supports longer production runs and reduces changeovers during cabinet or fixture fabrication.

Key Edgebanding Details That Support Shop Work

• The 15/16 inch width gives intentional overhang on 3/4 inch material, so trimming operations can leave a tight, flush edge without risking chip-out of the panel face during routing or scraping.
• The .018 inch thickness keeps the profile subtle along door and panel edges, which helps maintain a clean line where multiple panels meet and reduces the visual step between face material and edge.
• The Rehau PVC material creates a dedicated edge banding solution, so exposed board edges are covered and finished in a way that aligns with typical cabinet and fixture fabrication methods.
• The CP60229 decor reference ties this edgebanding to a specific finish target, which supports consistent color and pattern matching across multiple components in the same installation.
• The EMB LAC designation points to an embossed lacquered surface, so the edge appearance can better coordinate with textured or coated panel faces in high-visibility applications.
• The 600 ft coil length supports extended runs of edging, which helps keep production flow steady on larger jobs with many shelves, doors, and cabinet sides.

Edgebanding Size And Format For Precise Application

This edge banding uses a 15/16 inch width, which is sized to give working overhang when applying to typical 3/4 inch substrates, so trimming tools can dial in a precise flush edge. The .018 inch thickness allows the banding to sit close to the face material, so the transition at the edge reads as a single plane from a normal viewing distance. Being supplied as a 600 ft length, this product supports continuous edging on runs of cabinets or casework without frequent changeovers, which can help maintain consistent feed and trimming setups throughout a project. The PVC construction defines it as a flexible banding material suitable for standard edgebanding machinery and workflows used in woodworking shops.

How This Rehau Edge Banding Fits Real Projects

Using CP60229 Edgebanding On Cabinets And Panels

This Rehau, Inc. PVC edge banding is specified with CP60229 in the description, anchoring it to a defined decor target for cabinetry and panel work. When edges on doors, shelves, and end panels use this same CP60229-coded banding, the finished assembly presents a unified look from face to edge. The 15/16 inch width gives room to position the band accurately on cabinet parts before trimming, helping operators keep the decorative face centered on the substrate. Edgebanding in a 600 ft coil is suited to production settings where many parts share the same finish, supporting batch runs on edgebanders without repeated material changes. As part of the Edge Banding product class within the edgebanding category, this material plays the role of closing off raw composite or wood-core edges so completed pieces present as finished furniture or fixtures.

Dimensions And Finish That Support Consistent Results

The .018 inch thickness of this edge banding works with common trimming and scraping tools, so operators can bring the edge down flush while keeping the banding profile modest along cabinet fronts. Because the width is specified at 15/16 inch, fabricators gain a defined amount of overhang that can be trimmed away uniformly, which supports repeatable results across multiple parts using the same setup. The EMB LAC notation describes an embossed lacquer surface, and that textured, coated face helps the edging visually align with other lacquered or structured materials in the build. The 600 ft length provides a consistent material source over many components, which supports color and texture continuity from the first panel to the last in a run. With manufacturer part number 302164-360 clearly defined, shops can reorder the same edgebanding when repeat jobs or additional matching pieces are required.

Common Questions About Rehau PVC Edgebanding 302164-360

Select Rehau 302164-360 For Matching Edged Panels

The Rehau PVC edgebanding 302164-360 combines a 15/16 inch by .018 inch size, CP60229 decor reference, and EMB LAC surface to handle visible cabinet and panel edges. For projects built around this decor, choosing this specific edge banding supports consistent, finished edges across doors, shelves, and casework while taking advantage of the 600 ft coil format for efficient shop runs.