Rehau PVC edgebanding gives you a dedicated PVC edge banding solution designed for woodworking projects that need a consistent, finished edge. The Rehau, Inc. brand and edge banding product class define this as a purpose-made edging material for panels in cabinet, furniture, and casework builds. The 15/16 inch width creates coverage for common panel thicknesses while still allowing slight overhang for trimming, which supports straight, uniform edges after processing. The .018 inch thickness provides a slim edge profile that works well where a lighter edge is preferred, helping panels keep a clean visual line. The CP60512 reference in the description identifies a specific design and finish combination for matching to compatible surfaces in a job set. The 600 ft length described in the SAP text supports longer runs or multiple cabinet projects from a single source, reducing changeovers during production.
The 15/16 inch width called out in the description affects how the Rehau PVC edgebanding sits on common panel edges during application. That width provides coverage beyond typical substrate thickness, giving room for trimming tools to cut back to a flush, square edge without exposing the core material. The .018 inch thickness guides how the banding responds to edge banding machinery pressure and trimming cuts, supporting a slim finished edge for cabinets and casework. The 600 ft length supports continuous feeding through edge banding equipment, which helps maintain a consistent setup across many parts without frequent roll changes during an installation or shop run.
The classification as edge banding and the PVC material reference position this Rehau, Inc. product for woodworking industry use, such as cabinets, furniture panels, and similar constructions that depend on covered edges. The 15/16 inch width and .018 inch thickness make it suitable for edging panel stock where a moderate overhang and a slim edge are desired, supporting clean trimming after application. The CP60512 designation in the SAP description ties this banding to a particular design family, which matters when aligning edge appearance with compatible decorative surfaces in a shop or commercial casework program. The 600 ft length lets installers and fabricators handle projects that range from small runs to larger job lots while staying with the same edge banding specification.
The 15/16 inch by .018 inch sizing specified for this Rehau PVC edgebanding defines how it behaves under edge banding equipment during repeated setups. The width gives consistent overhang for trimming, which supports predictable results when routing or scraping flush to the face material across many parts. The relatively thin .018 inch profile supports a refined edge appearance that works well when panels are viewed closely, such as cabinet doors and drawer fronts. The 600 ft roll length noted in the SAP description supports extended production using identical material, which helps maintain color, gloss, and profile uniformity from the first part to the last in a project run.
Rehau 302164-364 is PVC edgebanding in the edge banding product class, so it serves as a dedicated edging material for covering exposed panel edges in woodworking projects.
This Rehau PVC edgebanding is described as 15/16 inch by .018 inch, providing a moderate overhang width and a slim edge profile suited to panel edging in cabinets and similar work.
The SAP description specifies a 600 ft length, which supports longer cabinet or casework runs using a single continuous supply of the same edge banding specification.
The CP60512 reference in the description identifies a specific Rehau design and finish combination, helping match this edgebanding to compatible decorative surfaces within that design family.
The 15/16 inch width gives coverage beyond typical panel thickness, allowing edge banding equipment to leave overhang that can be trimmed back to a clean, flush edge.
The .018 inch thickness creates a relatively thin PVC edge, supporting a subtle transition from face to edge on doors, drawer fronts, and other visible panel components.
This Rehau PVC edgebanding from Wurth Baer Supply is defined by its 15/16 inch width, .018 inch thickness, and 600 ft length, giving you a clear set of sizing and run-length parameters for cabinet and panel edging. The manufacturer part number 302164-364 and CP60512 design reference connect the material to a specific Rehau finish family, supporting repeated use on follow-up jobs that require the same look and dimensions. When a project calls for PVC edge banding in this size range and design family, this roll provides a consistent option for covering exposed panel edges across woodworking applications.
Sold In: 1 Roll