Rehau PVC Edgebanding, 302164-380, is edge banding from Rehau, Inc. that is designed to cover exposed panel edges so finished parts present a consistent appearance across the run. The SAP description 15/16X.018 CP41317 EMB LAC 600FT identifies a 15/16 inch wide, 0.018 inch thick PVC strip that fits common panel thicknesses while keeping a low profile at the edge. The CP41317 EMB LAC designation points to an embossed lacquer surface, which gives the PVC a textured coated finish that helps panel edges visually match adjacent surfaces. Supplied in a 600 foot length, this edgebanding supports longer production runs or multiple projects from a single roll, which helps reduce job interruptions for material changeover. As an edge banding product in the Miscellaneous|Edgebanding category, it fits naturally into cabinet, furniture, or fixture workflows that call for PVC banding on engineered panels.
The specified 15/16 inch width on Rehau PVC Edgebanding, 302164-380, gives enough coverage to span typical engineered-panel edges, which helps keep glue lines and core material concealed after trimming. Its 0.018 inch thickness creates a slim edge that sits close to the panel face, supporting clean routing and scraping without excessive material removal. The CP41317 EMB LAC embossed lacquer surface gives the PVC band a textured, coated appearance, which helps the finished edge read visually as part of the overall panel surface. With 600 feet per roll, this edgebanding can support a sequence of cabinets, shelves, or partitions in one run, helping maintain uniform edge appearance from the first piece to the last.
As an Edge Banding product categorized under Miscellaneous|Edgebanding, Rehau PVC Edgebanding, 302164-380, is suited to woodworking environments where exposed board edges need a PVC finish. The 15/16 inch width lines up with many cabinet and furniture panel thicknesses, so it can be applied along sides, shelves, and dividers to cover visible cores. Its 0.018 inch thickness allows the band to be trimmed flush after bonding, supporting smooth corners on casework and fixtures. The CP41317 EMB LAC embossed lacquer finish gives the edge a defined surface character, which helps it coordinate with coated or decorative panels used in shop-built components.
The Rehau 302164-380 identification, also referenced as RU302164-380 in the web description WBSC - 1432 - RU302164-380, gives installers and buyers a clear code to match when they want repeatable edge appearance across projects. Using a PVC banding with a defined 15/16X.018 profile helps machines and operators work with known dimensions, so trimming and scraping setups can stay consistent from job to job. The CP41317 EMB LAC embossed lacquer surface provides a finished face on the band itself, which means once bonded and trimmed, the edge presents a ready-to-use appearance without additional surface treatment. With a 600 foot length available on a single roll, shops can edge multiple components in sequence, helping them hold the same texture and finish around an entire run of cabinets, panels, or fixtures.
Rehau PVC Edgebanding, 302164-380, is identified as 15/16X.018, meaning it is 15/16 inch wide and 0.018 inch thick, which supports coverage and flush trimming on common panel edges.
The CP41317 EMB LAC designation on this PVC edgebanding indicates an embossed lacquer surface, giving the band a textured, coated finish that helps edges visually coordinate with finished panels.
Rehau PVC Edgebanding, 302164-380, is specified at 600FT, providing 600 feet of material for extended edging runs across cabinets, shelves, or panels.
Rehau 302164-380 is identified as PVC Edgebanding, so the edging is made from PVC, giving a plastic edge surface suitable for engineered wood panels.
This edgebanding is identified by Manufacturer Part # 302164-380 and web reference RU302164-380, which helps match the same size and finish when ordering for future projects.
As an Edge Banding product in the Miscellaneous|Edgebanding category, this PVC banding suits woodworking projects where panel edges require a finished PVC surface, such as cabinets or fixtures.
Rehau PVC Edgebanding, 302164-380, combines a 15/16 inch width, 0.018 inch thickness, and CP41317 EMB LAC embossed lacquer finish to deliver a defined edge profile and texture on panel work. The 600 foot roll length supports production-oriented shops that want consistent edging across multiple components without frequent material changes. Using the precise identifiers 302164-380 and RU302164-380 ties each project back to a specific size and finish, helping future work match earlier installations. For jobs that call for PVC banding on engineered panels, this Rehau edge banding provides a clearly specified option that aligns with typical cabinet and furniture workflows.
Sold In: 1 Roll