Rehau PVC edgebanding 302164-382 is a Rehau, Inc. edge banding designed to finish exposed panel edges in woodworking projects, so installers can cover raw substrate and present a uniform edge line across cabinets or fixtures. The 15/16 inch width works with standard panel thicknesses, giving enough coverage to trim flush without exposing the core. The .018 inch thickness provides a lean profile that blends into the panel face, helping create a precise, furniture-style edge detail in production or jobsite work. The CP41318 designation identifies a specific Rehau material and finish combination, so shops can repeat the same look across runs or repairs. The EMB reference signals an embossed-style surface, which supports visual depth along the edge when matched to compatible faces. The LAC notation identifies a lacquer-oriented finish system, aligning this edgebanding with panel finishes built around lacquer processes.
The 15/16 inch Rehau PVC edgebanding width gives installers extra material beyond the face of common panels, so the band can be applied with slight overhang and then trimmed flush for a straight, controlled edge. The .018 inch thickness provides a workable balance between flexibility and profile, which suits automatic and manual edgebanding equipment that is set up around thin, PVC-style tape. The PVC edge banding construction responds predictably under trimming and scraping, helping reduce tear-out at corners and keeping the transition between face and edge smooth on door and casework components. With this combination, shops can dial in edgebander settings once and run repeated parts with consistent results.
This Rehau PVC edgebanding, classified as edge banding in the edgebanding category, is suited to woodworking shops that work with laminated or finished panels and need to cover exposed edges along cabinet sides, shelves, or casework components. The 15/16 inch width allows application to vertical gables, horizontal shelves, and similar elements built from typical panel stock, leaving room for precise trimming on both faces. As a Rehau, Inc. PVC edge banding product, it aligns with processes centered around edgebanding equipment that runs thin PVC tape across residential, commercial, or institutional casework programs. The CP41318 reference further defines this specific material and finish, helping operations align the edge appearance with selected panel faces within coordinated jobs.
The .018 inch thickness of this Rehau PVC edge banding supports consistent trimming, because the material presents a defined, narrow profile to cutters and scrapers, helping maintain uniform reveals across long edges. The EMB indicator establishes that this edgebanding uses an embossed-style surface, which affects how light plays across the edge and helps visually tie the edge detail into textured or structured panel finishes. The LAC designation signals a lacquer-oriented finish system, so when shops run lacquer-focused finishing programs, the edge appearance can align more closely with those lacquered faces. The 600FT roll length supports extended production without mid-run material changes, which helps maintain the same CP41318, embossed, lacquer-style edge across all related parts in a batch. The manufacturer part number 302164-382 gives purchasing and production teams a precise reference, reducing substitutions and supporting repeat work where the same edge look and behavior are required.
Rehau 302164-382 is a Rehau, Inc. PVC edge banding classified as edge banding, so it is used to finish and cover exposed panel edges on cabinets, shelves, and similar woodworking components.
Rehau PVC edgebanding 302164-382 has a 15/16 inch width, giving enough coverage over standard panel thickness so installers can trim the band back to a clean, flush edge.
This Rehau PVC edge banding has a .018 inch thickness, providing a slim, machinable profile that works well with edgebanders and trimmers set up for thin PVC tape.
The Rehau 302164-382 PVC edgebanding is specified at 600FT in length, supporting longer cabinet or casework runs while holding the same material and finish across parts.
On this edge banding, CP41318 identifies a specific Rehau material and finish combination, while EMB LAC indicates an embossed, lacquer-oriented surface character for the edge.
This Rehau PVC edgebanding 302164-382 is supplied through Wurth Baer Supply, a specialty wholesale distributor serving the woodworking industry with edge banding and related materials.
Choose Rehau PVC edgebanding 302164-382 when a 15/16 inch by .018 inch PVC edge banding is needed to finish exposed panel edges with a consistent, embossed lacquer-style surface. The 600FT length and defined Rehau CP41318 specification support repeatable runs, while the 302164-382 part number clearly identifies this exact edge banding for ongoing woodworking programs.
Sold In: 1 Roll