Rehau PVC edgebanding 302164-384 is PVC edge banding from Rehau, Inc. that covers exposed panel edges, so cabinet and furniture projects present a finished appearance instead of visible core material. The 15/16 inch width described in the SAP description gives coverage for common panel thickness with a small overhang, which supports trimming flush without exposing the substrate. The .018 inch thickness noted in the SAP description provides a slim edge profile that keeps the look light while still masking raw board edges in use. The CP40843 reference in the SAP description identifies a specific design match, so fabricated components can align visually with panels using the same decor. The EMB designation in the SAP description indicates an embossed surface, which adds texture that can reduce the appearance of minor handling marks along the edge during regular shop work. The LAC notation in the SAP description indicates a lacquered finish, giving the edge a sealed surface that supports a uniform look along cabinet runs.
The 15/16 inch width in the SAP description gives fabricators coverage for typical panel thickness with extra material on each side, which supports standard trimming techniques and keeps the glue line away from the front face. The .018 inch thickness described in the SAP description creates a lean edge, so applied strips sit close to the panel surface and help doors and drawer fronts retain their intended proportions. The PVC material identified in the product name provides a plastic edge solution, which supports typical woodworking shop handling while covering exposed cores on cabinetry and casework. The embossed and lacquered indications in the SAP description point to a textured, sealed surface, allowing edges to visually complement decorative faces and maintain a consistent finish line along the project.
The product class listed as edge banding defines this Rehau, Inc. item as trim for exposed panel edges on cabinets, furniture, and other casework, so shop teams can convert cut panel stock into finished-looking parts. The category reference to Edgebanding further positions it for woodworking environments where sheet goods are cut to size and need finished edges before assembly. The 15/16 inch width in the SAP description matches common panel configurations, which supports use on doors, drawer fronts, shelves, and cabinet sides without changing setups between component types. The 600FT length in the SAP description provides enough material for runs of repeated parts, making it useful when producing multiple cabinets or longer banks of casework from the same decor. The CP40843 decor identifier in the SAP description ties this edge banding to a defined pattern, helping shops keep visual alignment between panels and edges across kitchens, offices, or built-ins.
The PVC material called out in the product name gives a uniform synthetic edge, so cut lengths respond consistently across a run when trimmed and flushed on typical woodworking equipment. The .018 inch thickness in the SAP description provides a slim but tangible layer, so the transition from panel face to edge has definition without appearing bulky on narrow components. The embossed indicator (EMB) in the SAP description adds surface relief, helping edges sit naturally beside textured or patterned faces and reducing glare along long horizontal or vertical lines. The lacquer reference (LAC) in the SAP description notes a finished surface, which helps the edge present a ready-to-use appearance once applied and trimmed. The 600FT roll length from the SAP description supports extended runs, reducing interruptions during banding operations and helping maintain color and texture continuity from the first cabinet part to the last in the job.
Rehau 302164-384 edgebanding is described as PVC edge banding, so it uses a plastic edge material that covers exposed panel cores in cabinetry and furniture projects.
This Rehau PVC edgebanding is listed in the SAP description as 15/16 inch wide, giving coverage for common panel thickness with some overhang for trimming to a clean finished edge.
The SAP description states a .018 inch thickness, which offers a slim profile that masks raw board edges while keeping cabinet and furniture components visually lean.
The SAP description lists CP40843 EMB LAC, indicating a specific decor with an embossed and lacquered surface that supports textured, finished edges matching the intended design.
The SAP description specifies 600FT, providing a long run of material suited to projects needing many banded parts from the same design in one continuous supply.
This Rehau PVC edgebanding is categorized as edge banding for the woodworking industry, fitting cabinet, furniture, and general casework jobs using decorative panel stock.
This Rehau PVC edgebanding, identified as 302164-384, combines a 15/16 inch width and .018 inch thickness from the SAP description to cover typical panel edges with a slim visual line. The CP40843 embossed, lacquered decor reference gives a textured, finished surface that aligns with matching designs on panel faces. With a 600FT length noted in the SAP description, this edge banding supports extended cabinet or furniture production runs from a single roll. For shops working with decorative sheet goods, these details help turn cut panels into finished components ready for assembly.
Sold In: 1 Roll