Rehau PVC edgebanding gives cabinet and fixture builders a PVC edge solution from Rehau, Inc. that covers raw substrate edges so exposed cores are hidden, which keeps finished panels looking consistent across a run. The product name Rehau PVC Edgebanding, 302164-385 identifies it as part of Rehau's PVC edge banding line, so shops can match it with projects that already specify that system. The SAP description 15/16X.018 CP60519 EMB LAC 600FT defines a 15/16 inch wide strip at .018 inch thickness, which lets installers match this band to common panel thicknesses where a slightly overhanging edge is trimmed back for a flush finish. The CP60519 EMB LAC detail points to an embossed lacquer surface code, giving fabricators a finished look on the edge without another finishing step. The 600FT length in the SAP description indicates a continuous run, which supports batch work on multiple cabinets or parts.
The 15/16X.018 dimensions in the SAP description define the way this Rehau PVC Edgebanding, 302164-385 sits on a panel edge, so installers can set edgebanding machines or hand tools to handle the slight overhang and thin profile. The .018 inch thickness means trimming tools and routers remove minimal material, which is helpful when working close to delicate laminates or surfaces. The embossed lacquer surface identified by CP60519 EMB LAC presents a finished face during installation, so the banding can go directly on prepared substrate edges without later edge finishing steps. The 600FT length in the description supports continuous feeding on edgebanders, reducing changeover time between batches.
The Rehau PVC Edgebanding, 302164-385 is identified as Edge Banding in the product class, so it serves as the finishing strip for raw board edges on cabinets, casework, and similar assemblies. The 15/16 inch width in the 15/16X.018 CP60519 EMB LAC 600FT description gives a bit of extra coverage over common panel thicknesses, allowing edges to be banded and then trimmed to align with faces, which helps maintain consistent reveals on doors and panels. As a PVC edge solution from Rehau, Inc., it works in workflows that already rely on PVC banding, letting shops keep material types consistent across a project. The CP60519 EMB LAC embossed lacquer detail signals a worked surface on the banding, so when it is applied to cabinet edges it presents a finished edge that visually matches the intended program without secondary coating on the edge.
The stated .018 inch thickness in the SAP description lets operators dial in trimming and scraping settings, because the amount of material beyond the substrate is known, which helps reduce over-trimming on finished faces. The 600FT length specified in 15/16X.018 CP60519 EMB LAC 600FT lets production teams run many parts through an edgebander without changing rolls, helping keep color, sheen, and texture from shifting mid-job. The manufacturer part number 302164-385 allows the same Rehau PVC edgebanding to be reordered whenever that specific finish and size are required, which keeps replacement parts and future add-on cabinets visually aligned with earlier work. The product's classification under Miscellaneous|Edgebanding at Wurth Baer Supply places it within a dedicated edge banding assortment, aiding shops that standardize on known part numbers for repeat jobs.
Rehau PVC Edgebanding, 302164-385 uses the 15/16 inch width from the 15/16X.018 CP60519 EMB LAC 600FT description, so it spans typical 3/4 inch panel edges with room to trim back for a flush finish.
This Rehau PVC edgebanding has a .018 inch thickness according to the 15/16X.018 CP60519 EMB LAC 600FT description, which supports a slim, low-profile edge that trims easily on standard edgebanding equipment.
The CP60519 EMB LAC code in the SAP description indicates an embossed lacquer surface, giving the edge a prefinished appearance that helps completed panels leave the shop ready for installation.
The Rehau PVC Edgebanding, 302164-385 is described as 15/16X.018 CP60519 EMB LAC 600FT, so it provides 600 feet of continuous banding for extended cabinet or fixture production runs.
The Edge Banding product class and 15/16X.018 dimensions align this Rehau PVC edgebanding with cabinet, casework, and panel projects where raw substrate edges need a finished PVC edge treatment.
The .018 inch thickness noted in the SAP description lets operators set trimmers and scrapers to remove a small, predictable amount, helping maintain clean edges without cutting into decorative faces.
The Rehau PVC Edgebanding, 302164-385 from Wurth Baer Supply combines a 15/16 inch width, .018 inch thickness, and CP60519 EMB LAC embossed lacquer surface into a defined edge solution that suits cabinet and panel work. The 600FT length supports efficient production on edgebanders or manual setups across multiple parts. The precise manufacturer part number 302164-385 makes it straightforward to repeat the same finish and size on follow-up jobs or matching additions. For shops needing a consistent PVC edge treatment that matches these dimensions and surface details, this Rehau PVC edgebanding provides a clearly specified option.
Sold In: 1 Roll