Rehau PVC edgebanding 302164-413 is PVC edge banding that finishes exposed panel edges, so cabinets and casework gain a uniform, professional look along every cut surface. The Rehau, Inc. brand identity on this product gives installers a defined source reference when matching existing work or specifying material. The 302164-413 manufacturer part number ties directly to the SAP description, helping shops track this exact item across purchasing, inventory, and job costing. The SAP description 15/16X.018 CP41340 EMB LAC 600FT identifies it as a 15/16 inch wide edging at .018 inch thickness, giving fabricators a size profile suited to typical panel stock. As part of the Edge Banding product class and Edgebanding category, it fills the role of covering raw board edges so finished pieces present consistent edges from one component to the next.
The SAP description 15/16X.018 CP41340 EMB LAC 600FT identifies this edging as approximately 15/16 inch wide, which gives panel shops coverage for common board thicknesses with a small amount of overhang for trimming. The .018 inch thickness in the same description defines a relatively thin PVC profile, so trimmers and routing operations can be set to remove minimal material while still flushing cleanly to the panel face. Being defined as Edge Banding in the product class confirms its intent for edge finishing, letting fabricators align this profile with standard panel-processing sequences from cutting through final edge finishing.
The category listing as Edgebanding and product class Edge Banding position Rehau PVC Edgebanding, 302164-413, for use on exposed panel edges in woodworking and cabinetry projects. The 15/16X.018 dimension callout in the SAP description suits work built from panel materials where a band just under 1 inch wide is appropriate, supporting typical casework side panels, shelves, and dividers. The PVC designation in the product name means it aligns with shop environments that standardize on PVC edging, so existing processes for cutting, bonding, and trimming PVC can be used across multiple jobs. The CP41340 EMB LAC reference inside the SAP description differentiates this specific style within the Rehau range, which helps larger operations assign it to particular program sets, room types, or client standards without confusing it with other profiles.
The defined width of 15/16 inch in the 15/16X.018 CP41340 EMB LAC 600FT SAP description supports consistent setup of edgebanding machines, since operators can dial in guide and pressure settings around that known band width. The .018 inch thickness value in the same description informs trimming and scraping expectations, limiting how aggressively finishing passes need to be set so edges stay clean without digging into the panel surface. The manufacturer part number 302164-413 provides a stable reference for documentation, allowing estimators, programmers, and installers to call out the same edging in drawings and material lists so the edge details match from planning through field installation. The identification of this product as Rehau PVC Edgebanding under the Rehau, Inc. brand also supports consistency when replacing damaged pieces later, because matching the same brand and part number helps maintain a uniform appearance across affected panels.
Rehau PVC Edgebanding, 302164-413, is PVC edge banding in the Edge Banding product class, so it is used to cover and finish exposed panel edges on cabinetry and similar casework.
The 15/16X.018 in the SAP description indicates the edgeband is about 15/16 inch wide and .018 inch thick, which guides equipment setup and trimming expectations around this size profile.
The Rehau, Inc. brand designation ties this edgebanding to a specific manufacturer, so shops can align purchasing, color matching, and documentation with a consistent brand source across projects.
The manufacturer part number 302164-413 uniquely identifies this edgebanding variant, helping operations reorder the same item and maintain consistent appearance and sizing on repeat jobs.
The Edge Banding product class designation defines its intended role as a finishing material for panel edges, so shops can place it correctly in their cabinet and furniture construction workflows.
The CP41340 EMB LAC 600FT text in the SAP description distinguishes this specific Rehau edging variant, supporting separation from other styles during selection, planning, and inventory control.
Rehau PVC Edgebanding, 302164-413, offers a clearly specified 15/16X.018 profile within the Edge Banding class, giving shops a known size and material for finishing panel edges. Using the Rehau, Inc. brand name and 302164-413 part number in project documentation supports consistent sourcing and appearance from initial fabrication through later matching work. For cabinetry, furniture, or other panel-based builds that rely on PVC edge treatment, this defined Rehau profile provides a straightforward option to align edging details with established shop standards.
Sold In: 1 Roll