Rehau PVC edgebanding 302164-445 is PVC edge banding designed to cover raw panel edges, so cabinet and furniture projects gain a finished look and protected edge in one step. The 15/16 inch width gives coverage that works with standard panel thicknesses, so installers can trim flush without leaving exposed core material. The .018 inch thickness provides a low-profile edge, which supports tight edge seams on casework and shelving where a slim band is preferred. The CP60107 reference identifies the specific decor version, so shops can repeat orders and maintain visual consistency across multiple jobs. The EMB designation points to an embossed surface structure, which adds texture that helps the banding blend with modern decorative surfaces on cabinets and fixtures. The LAC reference indicates a lacquered finish layer, which provides a smooth final surface that supports straightforward cleaning during regular use.
The 15/16 inch by .018 inch size defines how this Rehau PVC edgebanding sits on the edge, so edgebanders can be set up to center the band and trim both faces cleanly. The embossed EMB surface texture changes how the band rides against pressure rollers, which matters when dialing in roller pressure to avoid flattening the surface pattern. The lacquered LAC finish gives a smoother top layer, which affects trimming and scraping because cutters engage a sealed surface rather than a raw PVC face. The 600FT length indicated in the description supports longer uninterrupted runs, so setup time on automated edgebanders is used efficiently across multiple cabinet or shelving components.
This Rehau edge banding CP60107 style is identified as edge banding within the edgebanding category, so it fits applications where raw panel edges on cabinets, fixtures, or furniture need to be finished. The 15/16 inch width aligns with edges on common panel constructions, so it can cover faces and overhang slightly for trimming without exposing substrate after machining. The .018 inch thickness works on projects where a light edge is preferred, supporting applications such as residential or commercial casework where a thick, rounded edge is not desired. The PVC material suits shop environments working with engineered wood materials, because it pairs with typical edgebanding equipment and workflow found in woodworking production.
The CP60107 decor code connects this banding to a specific visual design, so it supports projects where repeating the same look across multiple rooms or units is important. The EMB embossed surface structure gives the edge a textured feel, which pairs with textured boards on cabinets and fixtures to keep the edge from looking flat compared to the face. The lacquered LAC surface sits on top of the PVC, offering a smoother outer layer that supports day-to-day cleaning while maintaining the defined surface pattern underneath.
The 15/16 inch width on this 302164-445 PVC edgeband gives installers working tolerance, so minor panel thickness variations still end with a fully covered edge after trimming. The .018 inch thickness keeps routing and scraping passes light, which can shorten finishing time on casework lines while still protecting the substrate edge. The embossed EMB surface interacts differently with trimming and scraping than a flat surface, so careful tool setup preserves the designed texture across the full cabinet run. The lacquered LAC finish influences how the edge reflects light, which helps the banding visually align with coated or laminated surfaces used elsewhere on the project.
The 600FT length designation suits production workflows where repeated stops for shorter coils would slow output, so one coil can carry through a run of cabinets, shelves, or fixtures. The defined CP60107 decor and 302164-445 part number allow shops to match prior jobs by reordering the same banding, which is important when extending existing installations or building additional units later. Because this product is categorized as edge banding under edgebanding, it fits directly into standard edgebanding steps in woodworking shops, from cutting panel parts to final edge finishing.
Rehau PVC edgebanding 302164-445 has a 15/16 inch width, which covers typical panel edges and leaves a small overhang that can be trimmed for a flush, clean edge on cabinets and furniture.
This Rehau PVC edge banding has a .018 inch thickness, providing a slim edge that supports tight seams and light trimming passes on casework and shelving projects.
The CP60107 code identifies the specific decor style of this Rehau PVC edgebanding, which helps shops repeat the same appearance when matching existing cabinets or fixtures.
The 302164-445 PVC edgeband carries an EMB embossed surface designation with a LAC lacquered finish, giving a textured yet smooth edge that aligns with modern decorative panels.
The 600FT description indicates a longer run length, which supports extended edgebanding runs in shop production while limiting coil changeovers during cabinet or furniture builds.
This Rehau PVC edgebanding is categorized as edge banding for woodworking, fitting cabinet, furniture, and fixture projects that require finishing raw engineered wood panel edges.
This Rehau PVC edgebanding 302164-445 combines a 15/16 inch by .018 inch size, CP60107 decor, EMB embossed surface, and LAC lacquered finish to support clean, repeatable edges on panel-based projects. The 600FT length designation aligns with production runs where steady throughput matters. For shops building cabinets, furniture, or fixtures from engineered wood panels, this edge banding fits directly into standard edgebanding workflows while supporting appearance consistency across multiple jobs.
Sold In: 1 Roll