Rehau PVC edgebanding 302164-450 gives you a dedicated edge treatment for casework and panel projects, so exposed substrate is covered and the finished piece looks uniform from face to edge. The PVC edgebanding construction provides a consistent, machinable edge material that handles typical woodworking shop routines without changing how you cut or handle the core panel. The 15/16 inch width works with common 3/4 inch panels, so you have enough coverage to trim flush on both sides while fully hiding the core. The .018 inch thickness provides a thin, tight edge that blends closely to the panel face, which supports clean visual lines on doors, drawer fronts, and carcass edges. The CP40625 reference in the description identifies the specific design family this edgebanding is intended to complement, helping maintain visual continuity when matching to corresponding surfaces. The Rehau brand connection ties this roll into a broad program of edge solutions used throughout the woodworking industry.
The 15/16 inch width on this Rehau PVC edgebanding leaves you extra material beyond typical 3/4 inch panel thickness, so edge banders or hand trimmers can cut back to a clean, flush edge without leaving the core visible. The .018 inch thickness keeps the band relatively thin, which supports crisp trimming at corners and edges where a subtle transition is preferred. The PVC composition gives the strip a consistent profile along its length, so feed, trim, and scrape steps stay repeatable from one part to the next. The 600FT length described for this edgebanding provides extended runs before changing rolls, which is useful on cabinet jobs or production batches where set-up time affects overall throughput.
This Rehau PVC edgebanding, identified as 15/16 x .018 CP40625 EMB LAC, is sized for edge treatment on panel components where a slim, full-cover edge is required. The 15/16 inch width allows coverage that extends beyond the faces of 3/4 inch panels, so automated or manual trimming can cut back to a flush, even edge on cabinet sides, shelves, and fronts. The .018 inch thickness supports a refined edge presentation, helping the transition between edgebanding and substrate stay tight and visually minimal on finished work. The PVC material behaves like a stable, man-made edge surface, so it responds reliably under standard edgebander pressure and cutting tools across varied cabinet or fixture parts. The EMB LAC elements within the description point to an embossed, laminate-oriented styling, aligning this strip with decorative faces that share the same CP40625 design family in typical woodworking programs.
The combination of a 15/16 inch width and .018 inch thickness on this Rehau PVC edgebanding helps you balance coverage and subtlety, so you fully cover the substrate while keeping the edge visually light. By tying the description to CP40625 and EMB LAC, this band is positioned to coordinate with surfaces built around that design code, supporting consistent appearance across doors, drawer fronts, and carcass edges using the same family. The long 600FT length noted in the description means one roll can service many parts in a run, so edgebander setups can stay in place longer and part-to-part color and texture alignment remains consistent. The use of PVC as the edge material creates a controlled, repeatable cutting zone during trimming and scraping, which helps maintain edge quality across multiple operators and machines. Together, these details position this Rehau, Inc. edgebanding as a practical match for panel-based projects that follow the CP40625 design reference.
The Rehau 302164-450 PVC edgebanding is described as 15/16 inch wide by .018 inch thick, which suits coverage of typical 3/4 inch panels while allowing trimming back to a flush edge.
The Rehau 302164-450 edgebanding is described with a 600FT length, providing extended continuous material so longer runs of cabinet parts can be processed with fewer roll changes.
The CP40625 reference in the description identifies a specific design family, helping this Rehau PVC edgebanding align with surfaces and laminates that follow the same code.
The .018 inch thickness on this Rehau PVC edgebanding produces a relatively thin edge, supporting a subtle transition between band and panel for clean cabinet and fixture lines.
The 15/16 inch width on this Rehau edgebanding gives slight overhang on 3/4 inch panels, allowing trimming on both sides while keeping the substrate fully covered after processing.
The Rehau 302164-450 edgebanding is identified as PVC edgebanding, providing a uniform synthetic edge suited to typical woodworking and panel-processing environments.
This Rehau PVC edgebanding 302164-450 pairs a 15/16 inch width, .018 inch thickness, and CP40625 EMB LAC design reference to support panel work within that style family. For runs built around CP40625 decorative faces, this 600FT PVC edgebanding format delivers consistent edges across cabinet or fixture components while aligning dimensions and material to common panel-based construction.
Sold In: 1 Roll