Rehau PVC edgebanding 302164-491 is a PVC edge banding that finishes exposed panel edges so cut boards present a uniform, workable surface. The 15/16 inch width covers common panel thicknesses while giving a slight overhang that can be trimmed clean for a straight, consistent edge line. The .018 inch thickness keeps the edge low profile, which helps panels stack neatly and keeps transitions at the edge subtle on cabinets and casework. The CP41408 EMB LAC designation identifies this specific finish and texture, allowing shops to match the same edge detail across multiple jobs. This edgebanding is supplied in a 600 foot length, so production runs can be handled from a single roll, reducing changeovers during cutting and application in the shop.
The 15/16 inch width on this Rehau PVC edgebanding gives installers a modest margin beyond the panel thickness, which helps during application where slight alignment variation can occur. After bonding, the extra width can be trimmed flush, leaving a straight edge line along cabinet sides, shelves, or doors. The .018 inch thickness means less material stands proud at corners, so trimming and light sanding moves quickly and produces a crisp edge transition. With a 600 foot roll, installers can set up once on their edgebander or hand-application station and process many parts before changing material, which supports steady workflow on repetitive cabinet or fixture jobs.
This Rehau PVC edgebanding from Wurth Baer Supply is part of the edgebanding product class, so it suits projects where exposed board edges need covering, such as casework, cabinetry, and similar panel-based builds. The 15/16 inch width works well on common panel thicknesses, giving just enough excess for trimming on cabinet sides, shelves, and door edges. The .018 inch thickness keeps the edge discrete, which is useful when a slim profile is preferred on modern or utility builds. The CP41408 EMB LAC designation helps shops align this edge detail with matching surfaces where the same appearance code is already specified in drawings or material lists.
The defined 15/16 inch by .018 inch size allows shops to standardize edgebander and trimmer setups, so once dialed in, the same settings can be reused whenever Rehau PVC edgebanding 302164-491 is run. That sizing predictability helps reduce rework because trimming tools can be set to remove the narrow overhang consistently without cutting into the panel face. The 600 foot roll length supports longer production runs, keeping feed conditions more consistent across a batch of parts. With a single material code, CP41408 EMB LAC, purchasing and production can call out the same edgebanding every time a matching edge is required, which supports uniform appearance across cabinets, fixtures, or repeat projects over time.
Rehau 302164-491 is a PVC edge banding in the edgebanding product class, so it is used to cover and finish exposed edges on panel-based constructions.
The 15/16 inch width extends slightly past typical panel thickness, giving room to trim flush so the core material stays covered after machining.
The .018 inch thickness creates a thin edge that trims quickly and leaves a subtle transition, which is useful where a low-profile edge is desired.
The 600 foot roll length lets shops run many parts from a single roll, supporting continuous production with fewer material changeovers.
The CP41408 EMB LAC code identifies a specific finish and look, so drawings and orders can call out the same edge detail for consistent results.
This PVC edge banding from Wurth Baer Supply is applied to panel edges in cabinet, casework, or similar woodworking projects to create finished edges.
This Rehau PVC edgebanding 302164-491 from Wurth Baer Supply combines a 15/16 inch width, .018 inch thickness, and 600 foot roll length to support steady cabinet and casework production. When a project calls for the CP41408 EMB LAC edge appearance in a standardized size, this edgebanding offers a defined, repeatable option for covering panel edges across multiple parts and job runs.
Sold In: 1 Roll