Rehau PVC edgebanding 302164-498 15/16 x .018 600FT

Rehau PVC Edgebanding 302164-498 For Clean Edges

Rehau PVC edgebanding 302164-498 is a PVC edge banding from Rehau, Inc. that covers and protects raw board edges so panel projects present a finished, professional line along every visible side. The 15/16 inch width gives coverage across common panel thicknesses while allowing a small trim margin, which supports tight, flush edges after trimming. The .018 inch thickness provides a low-profile band that sits close to the substrate, helping panels keep a sleek edge detail. The CP20948 reference in the description ties this edgebanding to a specific design family, which matters when matching existing runs on cabinets or casework. The EMB LAC notation in the description identifies an embossed lacquer style, giving the band a textured, lacquered look that helps coordinate with compatible decorative surfaces. The 600FT length in the description supports longer runs so shops can handle multi-piece jobs from a single roll.

Key Rehau PVC Edgebanding Details That Matter

• The 15/16 inch width in the description gives enough coverage to span standard panel edges with trim allowance, helping installers route or file back to a clean, aligned edge without exposing the core.
• The .018 inch thickness in the description keeps the PVC edgebanding slim, which helps the band lie close to the substrate and can reduce the transition feel between face and edge during everyday use.
• The CP20948 designation in the description ties this roll to a particular design code, which supports consistent visual results when matching existing cabinetry or coordinating multiple components on the same job.
• The EMB LAC reference in the description points to an embossed lacquer style, giving the edge a textured lacquer appearance that can better relate to compatible decorative laminates along the entire run.
• The 600FT length in the description provides an extended run of edgebanding, which helps shops set up once and process multiple parts in sequence with fewer changeovers between rolls.

Edgebanding Size And Style For Installation Workflow

This Rehau PVC edgebanding 302164-498 uses a 15/16 inch width, which supports standard machinery setups for edging common panel thicknesses while still allowing a small overhang for trimming tools. The .018 inch thickness keeps the edge band modest in build, so cutters and trimmers can remove the overhang without creating a bulky profile at the edge. The EMB LAC description marker identifies an embossed lacquer look, which matters when orienting panels so the edge appearance lines up with the intended face direction. The 600FT length noted in the description gives enough material to run many cabinet parts in a single setup, helping maintain consistent feed settings from the first edge to the last on a project.

Using This Rehau Edge Banding In Real Projects

Where Rehau PVC Edgebanding 302164-498 Fits Best

Rehau PVC edgebanding 302164-498 is identified in the SAP description as 15/16X.018 CP20948 EMB LAC 600FT, making it a PVC edge banding suited to covering exposed edges on panel-based work. The 15/16 inch width provides coverage across panel edges commonly used in cabinetry and casework, leaving enough overhang to trim back to a crisp line along doors, drawer fronts, or carcass components. With a .018 inch thickness, this band runs as a relatively thin edge, which helps maintain a smooth transition between the faced surface and the edge, supporting a refined finished appearance. The CP20948 reference ties the edgebanding to a particular design pattern, turning this roll into a targeted choice when a job calls for that specific look across all exposed edges. The EMB LAC notation signals an embossed lacquer style, so the edge appearance is geared toward coordinating with surfaces that share a lacquer-like, textured character on cabinets, fixtures, or other panel constructions.

Details That Support Consistent Edge Finish And Results

The 15/16 inch width on this Rehau, Inc. PVC edgebanding gives installers a manageable amount of overhang during application, supporting repeatable trimming passes that leave a straight, continuous edge profile. Because the thickness is .018 inch, the amount of material to trim at the edge is modest, which can assist with achieving smooth corners and transitions when working through larger runs of parts. The 600FT length listed in the description provides enough continuous material to process many edges under the same machine settings, which helps keep color, texture orientation, and overall edge presentation consistent part after part. The EMB LAC descriptor points to an embossed lacquer presentation, setting an expectation for how the edge relates visually to matching surfaces so projects can carry the same style around every exposed perimeter. The manufacturer part number 302164-498 links this roll to Rehau, Inc., supporting precise reordering when a shop wants to repeat a job or expand an existing installation.

Common Questions About Rehau PVC Edgebanding 302164-498

Choose This Rehau Edgebanding For Matching Runs

Rehau PVC edgebanding 302164-498 combines a 15/16 inch width, .018 inch thickness, CP20948 design reference, EMB LAC style, and 600FT length to support edge finishing across coordinated projects. For work built around this specific Rehau, Inc. design code, this roll keeps edges visually aligned with the intended look from part to part.