Rehau PVC Edgebanding 302164-516 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cabinet and furniture projects present a uniform, professional look. The 15/16 inch width covers typical board thicknesses plus a small overhang, giving installers enough material to trim flush without exposing the core. The .018 inch thickness provides a low-profile edge that blends closely with modern panel stock, which helps projects match design expectations in kitchens, offices, or built-ins. The CP21096 designation identifies the specific decor, so shops can repeat the same visual match across multiple jobs. The embossed lacquer surface adds a defined texture and finish layer, so edges coordinate with textured panels that call for more than a plain smooth strip. Supplied in a 600FT length, the single roll supports longer production runs or multiple smaller projects without frequent reordering.
This Rehau PVC edge banding is specified at 15/16 inch width, giving fabricators enough margin to align the strip to the panel and still have material to trim away for a crisp finished edge. The .018 inch thickness works well where a relatively thin edge profile is desired, avoiding a bulky feel at doors, drawer fronts, or shelves. The PVC material suits common edge banding equipment routines, so shops can feed, bond, and trim this product using established processes for PVC edging. With the CP21096 embossed lacquer finish, installers can position the decorative face outward while trusting that the surface treatment is consistent along the 600FT length, supporting repeatable results from the first panel to the last.
This Rehau, Inc. PVC edge banding is categorized as edge banding for woodworking applications, so it fits naturally into cabinet, furniture, and casework production where panel edges must match a selected decor. The 15/16 inch width suits edge coverage on common panel constructions used in these shops, helping installers treat vertical cabinet sides, shelves, and door edges with the same product. Because the CP21096 embossed lacquer design is built into the banding, each length along the 600FT roll maintains the same appearance, which lets fabricators edge multiple components that will sit side by side in a finished installation. The PVC construction also aligns with standard edge banding workflows in many woodworking shops, supporting continuous-feed edging on straight runs that must look consistent across a job.
The combination of 15/16 inch width and .018 inch thickness gives installers a workable balance between coverage and subtlety, letting them hide the core material while keeping the visual transition between face and edge tight. The embossed lacquer finish specified in the SAP description adds surface character, which can reduce the visual contrast between the edge and matching textured panels when cabinets or fixtures are viewed at an angle. The 600FT length referenced in the description means a single roll can carry a project from machining through final assembly without switching to another lot, supporting visual continuity in long runs of cabinets or repeated furniture pieces. The specific 302164-516 and CP21096 identifiers tie this banding to a defined Rehau design, which helps shops standardize on a known look whenever that decor is specified.
Rehau PVC Edgebanding 302164-516 is a PVC edge banding from Rehau, Inc., used to cover exposed panel edges so cabinet and furniture components present a finished, matched appearance.
This edge banding is 15/16 inch wide, giving coverage over standard panel thickness and a small overhang, which supports trimming back to a clean, straight edge.
The .018 inch thickness creates a relatively thin edge profile, helping the banding sit close to the panel face so finished parts avoid a bulky edge line.
The CP21096 embossed lacquer finish provides a textured, coated surface that supports projects needing an edge treatment that visually coordinates with similar embossed or lacquered panels.
The SAP description specifies a 600FT length, giving shops enough material to run multiple cabinets or furniture components from one continuous roll.
This PVC edge banding is categorized under edgebanding for woodworking, so it is used on exposed edges of cabinets, furniture, and other panel-based constructions.
This Rehau PVC Edgebanding 302164-516 combines a 15/16 inch width, .018 inch thickness, and CP21096 embossed lacquer finish to support cabinet and furniture projects that demand coordinated, finished edges. The 600FT roll length aligns with production-minded workflows for woodworking operations. For projects calling for this specific decor and size, this edge banding provides a defined, repeatable solution for covering exposed panel edges.
Sold In: 1 Roll