Rehau PVC Edgebanding 302164-517 For Clean Edges

Rehau PVC Edgebanding 302164-517 is a PVC edge banding from Rehau, Inc. that provides a defined finish to exposed board edges, so cabinet and furniture projects present a uniform, professional face. The 15/16 inch width covers standard panel thickness with a bit of overhang, which gives room for flush trimming without exposing the substrate. The .018 inch thickness keeps the edge profile low, which helps maintain a crisp, modern line after trimming. The CP60586 reference in the description identifies the specific design match, helping align this edgebanding visually with the intended board or laminate series. The 600FT length described in the product data supports longer runs in the shop, allowing continuous edging on multiple components before a roll change.

Key Rehau Edgebanding Details That Support Work

• The 15/16 inch width covers typical panel edges with extra material, giving room to trim both faces for a tight, clean edge that hides the core.
• The .018 inch thickness keeps the PVC profile subtle, which helps the edge transition smoothly to the panel surface after trimming and scraping.
• The PVC material is identified in the product name as edgebanding, so it is suited to finishing raw engineered board edges in cabinet and furniture production.
• The CP60586 designation in the SAP description ties this edgebanding to a specific decor reference, which supports color and pattern coordination across a job.
• The 600FT value in the description indicates a long running length, which helps maintain consistency across many parts in the same run without frequent roll changes.

Size And Identification Details For Installation

The 15/16 inch by .018 inch dimension stated in the SAP description defines how this Rehau edge banding sits on a panel edge, so tooling can be set to trim a small overhang from both faces. The CP60586 EMB LAC notation groups this edgebanding under a particular finish and design code, which helps match it with panels or laminates that share the same reference in a project library. The manufacturer part number 302164-517 gives a precise identifier, so the same specification can be repeated on future orders when an exact visual and dimensional match is needed.

Using This Rehau PVC Edge Banding In Projects

Where This 302164-517 Edgeband Is Typically Applied

This Rehau, Inc. PVC edge banding in 15/16 inch width is sized for covering exposed edges of common panel constructions used in cabinetry and furniture. The edge banding designation means it is intended to finish raw cut edges, turning open board cores into visually consistent surfaces that align with the face material. The CP60586 reference aligns this roll with a specific decor or finish family, making it appropriate wherever that matching surface is used on doors, drawer fronts, shelves, or cabinet cases. The 600FT length described supports shop environments where multiple components and repeat pieces are processed in series, keeping the same edge material running across an entire project or room set.

Why The Dimensions And Codes Matter For Results

The 15/16 inch width stated in the SAP description provides extra coverage beyond many nominal panel thicknesses, which allows trimming equipment to cut back to a precise flush edge without risking a reveal of the core. The .018 inch thickness keeps the edge slim, which helps routers and trimmers produce a sharp profile with minimal edge rounding. The PVC material type noted in the product name signals a balance between flexibility and structure at the edge, which supports consistent bonding on straight runs and helps maintain a stable profile under normal shop handling. The manufacturer part number 302164-517, paired with the CP60586 EMB LAC code, gives a clear mapping between this roll and its intended visual design, helping maintain continuity across replacement orders and additional phases of the same project.

Common Questions About Rehau 302164-517 Edgebanding

Select Rehau 302164-517 For Matching Edge Finishes

The defined 15/16 inch by .018 inch dimensions, PVC construction, and CP60586 EMB LAC code make this Rehau 302164-517 edgebanding a precise choice when edge details must align with a specific decor. Using this exact part number across a project keeps panel edges visually consistent from run to run. For cabinet, furniture, or casework jobs that reference this finish series, this Rehau PVC edgebanding provides the identified edge solution.