Rehau PVC edgebanding 302164-518 15/16 x .018

Rehau PVC Edgebanding 302164-518 For Clean Edges

Rehau PVC edgebanding 302164-518 identifies this Rehau, Inc. PVC edge banding as a specific, repeatable match for jobs that call for the same color and texture across multiple panels. The 15/16 inch width stated in the SAP description gives coverage across standard 3/4 inch panels with a margin for trimming, so installers can flush-trim both faces without exposing the core material. The .018 inch thickness balances a low profile with enough material to handle typical trimming tools, helping maintain a consistent edge line on cabinets and casework. The CP60587 code in the SAP description defines the decor reference, which helps shops align this roll with their chosen board or laminate program for uniform appearance on every run. The 600FT length in the description supports longer production runs or multiple jobs from a single roll, reducing mid-job changeouts on the edgebander.

Key Rehau PVC Edgebanding Details For Shops

• The Rehau, Inc. brand in the product data identifies this edgebanding as part of Rehau's PVC program, which helps shops standardize sourcing when they are matching existing Rehau-based jobs or specifications.
• The product class listing as Edge Banding and the category entry under Edgebanding anchor this item within typical cabinet and furniture workflows, making it suitable where raw board edges require a PVC treatment for a finished edge line.
• The SAP description "15/16X.018 CP60587 EMB LAC 600FT" calls out both dimensions and surface designation, helping estimators and programmers assign this specific roll to edgebanders that are already set up for similar thickness and texture.
• The 600FT length referenced in the SAP description supports batching multiple cabinet boxes or larger production runs from one roll, which can streamline setup sequences on edgebanding machines and reduce partial-change interruptions.
• The manufacturer part number 302164-518 lets purchasing and production teams reorder the same PVC edgebanding consistently, which is important when shops need visual continuity between current installations and future add-ons.

Size And Identification Details For Installation Setup

The 15/16 inch width in the SAP description provides extra coverage beyond typical panel thickness, giving edgebander operators room to trim both sides cleanly without risking a reveal of the substrate. The .018 inch thickness specified in the same description gives a known value for setting trimmers and scraper stations, so machine operators can dial in pressure and speed around a familiar PVC profile. The CP60587 EMB LAC portion of the description groups decor and surface characteristics under a single reference, helping programmers tie the correct coil to the right machining program or rack position. The 600FT length listed for this Rehau PVC edgebanding supports longer continuous runs, which is useful when a job requires multiple identical cabinet components with the same edge detail from start to finish.

Using Rehau 302164-518 In Cabinet And Casework Runs

Where This Rehau PVC Edgebanding Fits Best

The category assignment as Edgebanding and the product class Edge Banding position Rehau PVC edgebanding, 302164-518 for use on exposed board edges in cabinetry, furniture, and general woodworking projects. The 15/16 inch width from the SAP description supports edging on 3/4 inch panels used in typical cabinet side, shelf, and vertical divider applications, where a slight overhang is needed for trimming. The .018 inch thickness specified in the data suits edgebanding equipment that is tuned for thinner PVC, which is common in many shop settings focused on residential or light commercial casework. The CP60587 code within the SAP description gives a defined decor reference, useful in environments where matching a specific board program or finish series is part of standard workflow. The 600FT length noted in the description allows this coil to serve medium to larger runs, such as full kitchen sets or multiple room installations, without frequent roll changes.

Why These Dimensions Support Repeatable Results

The 15/16X.018 sizing called out in the SAP description gives both width and thickness in one line, allowing machine operators to store repeatable settings for pressure, trimming, and feed speed that correspond to this Rehau PVC edge banding. The defined thickness of .018 inch lets tooling be selected around a known material cross-section, which helps produce a consistent radius or square edge profile at the cabinet front. The CP60587 EMB LAC notation groups decor and texture information, and that clarity supports accurate coil selection when multiple Rehau PVC edgebanding references are on the rack. The manufacturer part number 302164-518 ties this specific combination of width, thickness, and surface reference together, so purchasing and production can align reorders with the same machining recipes, supporting predictable fit and appearance across repeat jobs.

Common Questions About Rehau PVC Edgebanding 302164-518

Select Rehau 302164-518 For Consistent Edge Runs

The 15/16X.018 dimensions, CP60587 EMB LAC designation, and 600FT length in the SAP description define Rehau PVC edgebanding, 302164-518 as a repeatable option for cabinetry and woodworking edges. The manufacturer part number 302164-518 ties these details together, so shops can align purchasing, programming, and machining around a single defined reference. For projects that rely on consistent edge appearance and familiar edgebander settings, this Rehau PVC edge banding offers a clearly documented combination of size and decor for ongoing work.