Rehau PVC edgebanding 302164-524 is a PVC edge banding designed to cover and protect exposed board edges in woodworking projects. The 15/16 inch width spans standard panel thicknesses with a small overhang, giving you enough material to trim back to a precise finished line. The .018 inch thickness provides a low-profile edge that blends closely with the board face, which helps achieve a uniform, furniture-like appearance. The CP41438 reference ties this banding to a specific design and color series, so runs using this same number maintain visual consistency across cabinets or components. A length of 600 feet supports extended production runs or multiple jobs from a single roll, helping maintain continuity when you repeat a project layout. This edgebanding is part of Rehau, Inc.s edge banding offering, aligning with common trade expectations for PVC edge treatment on cabinets and casework.
The stated 15/16 inch width gives a modest margin beyond common panel thicknesses, so installers can align the tape, bond it to the edge, and then trim back the slight excess for a flush finish. The .018 inch thickness establishes a thin edge profile that responds well to standard trimmers and knives, which supports clean passes without removing too much material from the board face. A continuous 600 foot length means fewer coil changes during runs, so setups stay consistent from the first cabinet edge to the last panel on the job. The combination of width, thickness, and run length lets shops plan edge banding steps in line with normal casework workflows using PVC edge treatments.
This Rehau PVC edgebanding, identified as 302164-524, is an edge banding intended for exposed board edges on cabinets, furniture, or casework where PVC edging is specified. The 15/16 inch width suits applications using panels close to three-quarter thickness, giving enough coverage for square or slightly eased edges. Because it is categorized as edgebanding, it fits naturally wherever raw substrate edges need a protective and decorative strip as part of woodworking or cabinetmaking. The CP41438 EMB LAC designation within the SAP description ties this product to a particular visual style in Rehaus offering, so shops that rely on matching finishes can keep the same reference for repeat orders. As an edge banding product, it integrates into workflows that already use PVC strip material to finish vertical sides, shelf fronts, and similar exposed edges.
The combination of 15/16 inch width and .018 inch thickness shapes how this edgebanding behaves in a shop setting, giving installers a familiar size that works with common trimmers and edge equipment. The slim .018 inch profile helps keep the transition between face and edge subtle, which matters when cabinets are installed in rows and any buildup at the edge would visually stand out. The defined part number 302164-524, paired with the CP41438 reference, lets purchasing and production call out the same exact banding each time, which avoids variation from job to job when edge color or design needs to remain consistent. With a 600 foot roll length available, shops can schedule an entire run of parts using one continuous supply of banding, helping keep edge appearance uniform across all finished pieces on a project.
Rehau 302164-524 is a PVC edgebanding classified as edge banding, so it is used to cover and finish exposed board edges on cabinets or similar woodworking projects.
Rehau PVC edgebanding 302164-524 has a 15/16 inch width, providing slight overhang on typical panels so the edge can be trimmed back to a clean, flush finish.
The .018 inch thickness gives the edgebanding a slim profile, which helps create a subtle edge transition and works well with standard trimming tools in cabinet shops.
The 600 foot length allows longer production runs from one roll, which helps maintain consistent edge appearance across multiple cabinets or casework parts on the same job.
The CP41438 reference in the description ties this edgebanding to a specific design series, helping shops reorder the same look for repeat or matching projects.
This PVC edgebanding, part number 302164-524, is produced by Rehau, Inc., aligning it with Rehaus established line of edge banding products.
The Rehau PVC edgebanding 302164-524 pairs 15/16 inch width with .018 inch thickness and a 600 foot length, giving cabinet and woodworking shops a defined size and run length for repeated projects. The CP41438 EMB LAC designation ties each roll to a consistent design profile, which supports visual continuity from one job to the next. For operations that standardize on specific PVC edge banding dimensions and part numbers, this Rehau, Inc. edge banding offers a clearly identified option for finishing exposed board edges.
Sold In: 1 Roll