Rehau PVC edgebanding 302164-535 is a PVC edge banding from Rehau, Inc. that covers raw panel edges, creating a finished look on cabinets, furniture, and casework. The 15/16 inch width spans standard 3/4 inch panels with a margin, giving you enough material to trim cleanly without exposing the substrate. The .018 inch thickness keeps the edge profile slim, which helps match contemporary panel builds while still covering the core. The CP21100 designation identifies this specific PVC formulation, so shops can repeat the same material across projects for visual consistency. The EMB reference indicates an embossed surface, which helps the banding visually align with textured or patterned faces. The LAC designation indicates a lacquered finish, giving the surface a refined sheen that aligns well with finished fronts. The 600FT length provides extended run capacity, supporting production runs and reducing changeover between coils.
The 15/16 inch width on this Rehau PVC edgebanding gives installers a practical margin beyond typical 3/4 inch panel thickness, so trimming equipment can cut back to a clean, flush line without risking exposed substrate. The .018 inch thickness keeps the material light at the edge, supporting tight corners and minimizing the visual step where the banding meets the face. The 600FT length supports continuous feeding on edgebanders, which helps maintain a consistent feed setup over many parts. Together, these dimensions support an efficient workflow from setup through trimming, while targeting a neat, uniform edge appearance across all panel edges in a run.
This Rehau, Inc. 302164-535 PVC edgebanding fits projects that use 3/4 inch sheet goods where a finished edge is needed, such as cabinet boxes, shelves, doors, and general casework. The 15/16 inch width allows coverage over slightly overhanging faces or minor panel variances, supporting clean edges on vertical and horizontal parts. The EMB embossed surface helps it visually align with structured or textured laminates, which is useful on modern cabinet and furniture fronts that use tactile surfaces. The LAC lacquered finish supports use alongside lacquered or similarly finished faces, so the edge reads as part of the overall design rather than a separate strip. With 600FT per coil, shops can run multiple cabinets, closets, or furniture pieces from a single roll, supporting batch production environments.
The combination of 15/16 inch width and .018 inch thickness on this edge banding supports reliable trimming, because there is enough overhang for standard edgebanders and routers to cut back cleanly without leaving chatter marks. The PVC material gives a predictable cut and scrape behavior, which helps operators maintain a consistent setup and reduces adjustments between parts. The CP21100 formulation and 302164-535 part number give an exact reference, allowing shops to reorder the identical edge material and maintain continuity on repeat jobs or warranty work. The EMB embossed and LAC lacquered designations define the surface character, which helps designers and builders align this banding with their chosen board or front materials. The 600FT coil format supports longer uninterrupted runs, which helps maintain uniform feed pressure and temperature settings through a full batch of cabinet or furniture components.
Rehau PVC edgebanding 302164-535 has a 15/16 inch width, giving enough coverage over typical 3/4 inch panels so trimming operations can leave a clean, flush finished edge.
Rehau 302164-535 edge banding is .018 inch thick, which creates a slim edge profile that blends closely with the panel face while still covering the substrate.
The EMB designation on this PVC edgebanding indicates an embossed surface, helping the edge visually align with textured or patterned board surfaces in cabinet and furniture work.
The LAC marking on Rehau 302164-535 indicates a lacquered finish, giving the edge a finished surface that coordinates with lacquered or similar panel faces.
The Rehau PVC edgebanding roll for part 302164-535 is 600FT long, supporting extended edgebanding runs and reducing coil changes during production work.
Rehau 302164-535 is a PVC edge banding in the Edge Banding product class, used to cover raw panel edges on cabinets, furniture, and general casework.
Rehau PVC edgebanding 302164-535 combines a 15/16 inch width, .018 inch thickness, and 600FT coil length to support efficient edging of 3/4 inch panel projects. The CP21100 formulation, embossed surface, and lacquered finish define a specific look and feel that can be repeated from job to job. For shops standardizing on a known edge banding, this part number ties together size, material, and surface details so cabinet, furniture, and casework runs share the same finished edge appearance.
Sold In: 1 Roll