Rehau PVC edgebanding 302164-570 15/16 x .018

Rehau PVC Edgebanding 302164-570 For Clean Edges

Rehau PVC edgebanding 302164-570 is a PVC edge banding designed to finish exposed board edges on woodworking projects, so you can cover raw substrate edges with a consistent, job-ready edge. The 15/16 inch width spans standard panel thicknesses with room to trim, helping installers align and flush-trim without exposing the core. The .018 inch thickness gives a low-profile edge, which keeps the transition from face to edge subtle on cabinets or casework. The CP60431 EMB LAC description identifies a specific embossed and lacquered finish code, helping shops match this banding to existing specifications on repeat work. The 600FT length in the SAP description points to extended run capability, allowing longer production runs or multiple installations to be handled from a single SKU with consistent appearance.

Key Rehau PVC Edgebanding Details For Jobs

• The 15/16 inch width covers typical board thicknesses with trimming allowance, which helps installers route or scrape the edge down cleanly without risking a reveal of the core material during finishing passes.
• The .018 inch thickness keeps the edge banding slim, which reduces the visual step between panel face and edge and supports a smooth look on doors, drawer fronts, and casework components.
• The CP60431 EMB LAC code identifies a defined finish specification, which matters when fabricators need repeatable color and texture from job to job or when matching a shop standard on replacement parts.
• The 600FT reference in the SAP description reflects a long run length, which supports production environments that need continuous edging on multiple components without frequent roll changes or interruptions.
• The Rehau, Inc. brand identification ties this edgebanding to a known edge banding manufacturer, which helps shops align part numbers and finish codes with their existing Rehau-based drawings or cut lists.

Installation Fit And Workflow With This Edgebanding

This PVC edge banding in 15/16 inch width gives installers enough overhang on both sides of typical casework panels, so trimming tools can track reliably along the edge without cutting into the panel face. The .018 inch thickness keeps resistance low during trimming, which supports clean passes with handheld trimmers or edge banding stations. The CP60431 EMB LAC designation keeps the finish consistent from roll to roll, so shops can process replacement fronts or panels without reworking color or sheen transitions. The 600FT run length suits production lines or busy shops, allowing operators to feed multiple parts from the same Rehau PVC edgebanding 302164-570 reference during a project.

Using Rehau PVC Edgebanding In Woodworking Workflows

Where This Rehau Edge Banding Fits Best

This Rehau PVC edgebanding is categorized as edge banding in the Miscellaneous|Edgebanding class, so it fits tasks where exposed board edges on furniture or cabinetry need a finished PVC edge. The 15/16 inch width works around common panel build-ups, giving shops a practical choice for doors, shelves, or cabinet sides that are sized from typical sheet goods. The .018 inch thickness supports applications where a thin PVC edge is preferred over heavier profiles, keeping cabinet fronts and carcass parts visually streamlined. The CP60431 EMB LAC finish code gives specifiers a stable reference when calling out this edge banding on cut sheets or project documentation for repeat work.

The 600FT quantity in the SAP description aligns with production environments that process many linear feet of edging in a single job, such as commercial millwork runs or larger residential projects. By working from one continuous length, operators can sequence components from the same Rehau PVC edge banding, maintaining appearance continuity across doors, drawer fronts, and panels. The Manufacturer Part # 302164-570 provides a precise part identifier, which helps purchasing and shop staff tie this exact width, thickness, and finish combination into their ordering and labeling systems.

Why These Edgebanding Details Support Consistent Results

The 15/16 inch by .018 inch sizing creates a defined trimming window, which supports predictable setup of edge banding stations and handheld trim tools for this specific PVC banding profile. When operators know they are running this Rehau PVC edgebanding 302164-570 dimension, they can standardize trim bit exposure and scraping technique for repeatable outcomes. The CP60431 EMB LAC finish code keeps the visual and surface specification stable, so fabricators can rely on the same texture and lacquered appearance when a project calls for that exact Rehau finish.

The long 600FT reference supports planning of linear usage, allowing estimators and production managers to map out how many parts can be edged per reference without changing material. Because this product is identified as Rehau PVC edgebanding within the Edge Banding product class, it integrates cleanly into woodworking workflows that already specify PVC edging on exposed substrates. The consolidated data in the SAP description (15/16X.018 CP60431 EMB LAC 600FT) and the Manufacturer Part # 302164-570 enables clear communication between design, purchasing, and the shop floor about the exact banding that should be pulled for a given run.

Common Questions About Rehau PVC Edgebanding 302164-570

Select Rehau PVC Edgebanding 302164-570 For Your Next Run

This Rehau PVC edgebanding 302164-570 combines a 15/16 inch width, .018 inch thickness, and the CP60431 EMB LAC finish code, giving shops a defined PVC edging choice for exposed panel edges. With its 600FT reference length and clear Manufacturer Part #, it fits ordering systems and production workflows that depend on repeatable specifications. For projects calling for PVC edge banding in this size and finish family, this Rehau option from Wurth Baer Supply aligns part identification with practical edging performance on cabinets and casework.