Rehau PVC edgebanding 302164-579 is a PVC edge banding from Rehau, Inc. that finishes raw panel edges in woodworking projects. The 15/16 inch width covers standard panel thickness with a small overhang for trimming, helping installers achieve a consistent edge line on cabinets and casework.
The .018 inch thickness provides a slim profile, so edges sit close to the panel surface and keep the visual transition tight. The CP21113 reference identifies a specific design or color match within the Rehau range, which supports consistent appearance when matching other components specified with the same code.
The EMB notation signals an embossed surface character, giving the banding a textured face that visually breaks up light and supports a more furniture-like look on exposed edges. The LAC notation indicates a lacquered finish on the PVC, providing a finished surface that is ready for use once bonded, saving downstream finishing steps on the edge.
The 600FT length described in the SAP data refers to a long-run supply that supports extended production runs or multiple jobs without frequent changeover. Being classified as edge banding in the Wurth Baer Supply assortment places this product directly in the workflow for professional woodworking, cabinet fabrication, and similar applications that rely on finished panel edges.
This PVC edge banding is listed at 15/16 inch wide, giving fabricators working room to apply the banding slightly proud and then trim back for a clean joint with the panel face. The extra fraction beyond common panel thickness supports precise alignment after trimming.
With a .018 inch thickness, the banding adds minimal bulk at the edge, so trimmers can bring the surface close to flush with limited material removal. This helps maintain smooth transitions on cabinet and furniture parts where hand contact and visual continuity matter.
Because the product is identified as PVC edgebanding within the edge banding class, it is intended to be used as the finishing strip on raw panel edges in woodworking workflows, integrating into established edgebanding, trimming, and finishing stations in the shop.
The Product Name and Category identify this item as Rehau PVC edgebanding, Product Class edge banding, positioning it for use on cabinet, furniture, and general woodworking panel edges. The 15/16 inch width suits common panel builds where a slight overhang is preferred for trimming.
The CP21113 designation in the SAP description links this edgeband to a defined Rehau decor point, which matters when a project calls out a specific code. Using an edgeband tied to that same reference supports visual continuity across doors, drawer fronts, and case sides that share the decor.
The EMB notation describes an embossed surface, which is suited to applications where a textured edge is desired, such as coordinating with structured panel faces or reducing glare on exposed edges. This surface character can help edges blend into patterned or tactile laminates within a woodworking installation.
The LAC reference indicates a lacquered finish on the banding, aligning it with projects where a finished edge is required straight from the edgebanding step. In cabinet and furniture production, this allows the edge to move from banding to assembly without separate edge finishing operations.
The 15/16 inch width supports a repeatable installation process because it provides consistent overhang for machining, letting trimmers follow the same settings across multiple parts. This reduces variation at the edge and helps maintain uniform reveals along door and panel runs.
The .018 inch thickness contributes to predictable trimming behavior, as the relatively thin PVC profile removes quickly and allows edge tools to track along the panel face with less effort. That characteristic supports smooth, repeatable edges on high-count production batches.
The embossed (EMB) surface detail affects how light interacts with the edge, which can help hide minor fluctuations where parts meet. In real shop conditions, this assists in delivering edges that present well even when components are viewed along long cabinet runs.
The lacquered (LAC) finish keeps the face of the edgeband in a finished state, so once the bond and trimming steps are completed, the edge visually aligns with the specified design without additional finishing passes. This simplifies workflow when scheduling through edgebanding, assembly, and installation stages.
The 600FT length in the product description helps maintain process consistency over extended runs because one continuous supply reduces changes in feed characteristics from roll changes. For shops running multiple identical cabinets or room sets, this supports a steady rhythm at the edgebanding station.
Rehau 302164-579 edgebanding is a PVC edge banding from Rehau, Inc., classified as edge banding in the Wurth Baer Supply assortment, used to finish raw panel edges in woodworking projects.
Rehau PVC edgebanding 302164-579 is listed at 15/16 inch wide, giving coverage over typical panel thickness with a small overhang that supports trimming back to a clean, flush edge.
This edge banding is .018 inch thick, providing a slim PVC profile that trims quickly and allows the finished edge to sit close to the panel surface for a tight visual transition.
The CP21113 reference in the SAP description identifies a specific Rehau design or color point, which supports consistent appearance when projects specify that same decor code.
The EMB notation indicates an embossed texture for the surface, and LAC indicates a lacquered finish, giving the edgeband a textured, pre-finished face suitable for visible edges.
The 600FT description indicates a long length suited to extended production runs, allowing shops to process many parts while keeping feed characteristics consistent across the batch.
Rehau PVC edgebanding 302164-579 combines 15/16 inch width, .018 inch thickness, and the CP21113 decor reference in a single edge banding solution. The EMB embossed texture and LAC lacquered finish supply a ready-to-use surface on visible edges.
The 600FT length supports continuous runs through edgebanding stations on cabinet and furniture jobs. For projects calling for PVC edge banding with specific Rehau references, this product aligns edge appearance and dimensions with shop workflow needs.
Sold In: 1 Roll