Rehau PVC edgebanding 302164-584 is a PVC edge banding from Rehau, Inc. that covers and finishes raw panel edges so cabinet and casework jobs present a uniform, finished perimeter. The 15/16 inch width described in 15/16X.018 gives coverage for common 3/4 inch panel edges with allowance for trimming, which helps installers flush-trim without exposing the core. The .018 inch thickness from the same description provides a thin, precise band, useful when you want tight edge details and minimal edge buildup around doors or shelving. The CP60604 EMB LAC designation in the SAP description identifies the specific color and texture family, giving shops a consistent reference when matching existing Rehau programs across multiple jobs. The 600FT length stated in the description supplies a continuous run for repetitive cabinet components, which reduces coil changes on the edgebander and supports smoother production runs on larger projects.
The 15/16 inch width called out in 15/16X.018 gives a slight overhang beyond typical 3/4 inch board thickness, which is useful when setting edgebander pressure and trimming stations to finish edges flush without risking chip-out of the substrate. The .018 inch thickness in the same designation characterizes this as a thin PVC band, allowing installers to tune scraping and buffing operations for a light touch that keeps transitions at door and drawer fronts subtle. The 600FT length specified in the SAP description suits repeated production passes, so once settings are dialed in you can run many cabinet components with the same configuration, helping maintain uniform edges from the first panel to the last.
The category listing as Miscellaneous|Edgebanding and Product Class Edge Banding defines this item as a banding solution for exposed panel edges on cabinetry, casework, and similar woodworking projects. The 15/16 inch width from the 15/16X.018 SAP description pairs well with standard 3/4 inch engineered wood panels, leaving enough margin for trimming while fully covering the core. Because it is PVC edgebanding, as stated in the product name, it suits environments where a synthetic edge is preferred on laminated or coated board rather than a raw edge. The designation CP60604 EMB LAC in the SAP description identifies a specific Rehau match program, helping shops align edge appearance with coordinated laminates or surfaces they already specify under the same CP60604 EMB LAC system.
The combination of 15/16 inch width and .018 inch thickness in the SAP description gives fabricators predictable material behavior when setting up edgebanders, trimming heads, and scraping stations, which supports repeatable results from panel to panel. The 600FT length described in the same SAP line reduces the frequency of roll changes on longer runs, so once feed speeds and heat settings are dialed in for this PVC edgebanding, operators can maintain that setup across many cabinet parts. Using the manufacturer part number 302164-584 during ordering links directly to the Rehau PVC Edgebanding, 302164-584 description, helping purchasing and production speak the same part language and minimizing mix-ups between similar colors or textures. The CP60604 EMB LAC reference provides a consistent identifier across documentation, which matters when projects return for additions or replacements and the shop wants the new edges to align visually with earlier work.
Rehau PVC Edgebanding 302164-584 is described as 15/16X.018, so it has a 15/16 inch width and .018 inch thickness, supporting coverage and fine trimming on typical 3/4 inch panels.
The SAP description states 600FT, meaning this PVC edgebanding is supplied in a 600 foot length, which supports extended cabinet or casework production runs without frequent coil changes.
Rehau PVC Edgebanding 302164-584 is identified as PVC edgebanding in the product name and classified as Edge Banding, so it is used to finish and cover raw panel edges.
The 15/16 inch width described in 15/16X.018 gives slight overhang on 3/4 inch panels, allowing trimming tools to cut back to a clean, flush edge without exposing the core.
CP60604 EMB LAC in the SAP description identifies the specific Rehau color and texture reference, helping shops match this edgebanding to coordinated surfaces specified under the same code.
The manufacturer part number 302164-584 uniquely identifies this Rehau PVC Edgebanding, 302164-584, so referencing it helps purchasing and production obtain the same edge material consistently.
Rehau PVC edgebanding 302164-584 combines a 15/16 inch by .018 inch profile, the CP60604 EMB LAC identification, and a 600FT length to support consistent, repeated cabinet and casework production. Using this specific manufacturer part number 302164-584 aligns ordering, machining setup, and visual matching around a single defined PVC edge banding, helping shops maintain continuity across initial installations and later additions.
Sold In: 1 Roll