Rehau PVC Edgebanding 302164-586 For Clean Edges

Rehau PVC edgebanding 302164-586 is a Rehau PVC edge banding designed to finish exposed panel edges so they match the surface visually and feel smooth in use. The 15/16 inch width covers standard 3/4 inch panels with a margin, giving room to trim flush without leaving a reveal. The .018 inch thickness provides a low-profile edge that blends closely with the face material, which helps create a uniform look across doors, drawer fronts, and casework. The CP21117 designation identifies the specific decor, so runs using this part number stay visually consistent across projects. The embossed lacquer surface adds texture and sheen to the PVC, so the edge reads more like a finished surface than raw plastic in everyday handling. The 600 foot length supports longer production runs, reducing changeovers during cabinet or furniture builds.

Edgebanding Details That Support Woodworking Flow

• The 15/16 inch width gives adequate overhang on 3/4 inch panels, so trimming operations can remove slight panel variances while still leaving a full, even edge.
• The .018 inch thickness lays close to the substrate, so routed or flush-trimmed edges blend with the panel without creating a noticeable step at the seam.
• The CP21117 decor code ties this edgebanding to a specific finish look, supporting color and pattern consistency on repeat jobs or field replacements.
• The embossed lacquer finish on the PVC creates a tactile surface that feels more like a finished panel, which supports a more refined edge on doors and case components.
• The 600 foot roll length lets shops handle multiple cabinets or casework runs from a single roll, which helps maintain appearance uniformity across a project.

Edge Banding Sizing For Practical Installation Work

This Rehau PVC edgebanding uses a 15/16 inch width, giving a controlled margin beyond typical 3/4 inch substrates so installers can trim back to a clean line after bonding. The .018 inch thickness keeps the edge light and flexible, which helps the band follow panel edges and handle trimming with standard edgebanding tools. Because the CP21117 decor and embossed lacquer finish are defined, fabricators can align this roll with matching sheet goods or previous runs identified by the same part number, so the installed edge ties in visually with surrounding pieces.

Using Rehau PVC Edgebanding 302164-586 In Projects

Where This Rehau PVC Edge Banding Fits Best

As an edge banding product in the edgebanding category, this Rehau PVC edgebanding from Rehau, Inc. serves woodworking jobs that call for finishing raw panel edges. The 15/16 inch width suits applications built around 3/4 inch engineered panels, such as cabinet cases, shelving, and furniture components, because it offers workable trimming allowance. The .018 inch thickness works where a slim, unobtrusive edge is preferred, helping keep attention on the panel face rather than the joint. With the CP21117 decor and embossed lacquer finish, this banding supports projects that specify that particular look, so doors, drawer fronts, and case edges share the same appearance. The 600 foot length is well aligned with shop environments that run multiple cabinets, closets, or commercial casework pieces under the same finish code.

Why These Edgebanding Details Support Repeatable Results

The defined 15/16 inch by .018 inch dimensions give installers predictable behavior during trimming, so settings on trimmers and routers can be standardized across panels using this banding. The CP21117 decor code and 302164-586 manufacturer part number let shops call out the exact edging in job files, which supports repeat orders that match previous installations under the same specification. The embossed lacquer surface on the PVC adds a finish character that helps the edge transition smoothly from panel face to edge in normal viewing, reducing the visual impact of the seam. Because this is a Rehau PVC edgebanding classified as edge banding, it slots directly into established edgebanding workflows in woodworking shops, so operators familiar with PVC edging can apply and trim it using their standard process while maintaining consistent results across units.

Common Questions About Rehau 302164-586 Edgebanding

Select Rehau PVC Edgebanding 302164-586 For Your Runs

Rehau PVC edgebanding 302164-586 pairs a defined 15/16 inch by .018 inch size with the CP21117 embossed lacquer decor, so panel edges can be finished to a consistent standard across jobs. For shop runs that specify this Rehau edge banding, choosing this part number aligns your edging with the same look, texture, and dimensions used elsewhere in the project.