Rehau PVC edgebanding 302164-587 is a Rehau PVC edge banding designed to cover and protect raw panel edges in woodworking and cabinet projects. The 15/16 inch width gives coverage across common 3/4 inch panels while allowing a small overhang for trimming, which supports a flush, finished edge after machining. The .018 inch thickness keeps the banding slim for tight radius work and efficient heat transfer during bonding, which supports consistent adhesion along straight and curved runs. The CP41484 reference identifies a specific design line, so repeated orders match the same look from job to job. The embossed surface detail adds texture compared with a smooth band, which helps the edge visually coordinate with textured laminates or melamine faces. The lacquer reference in the description indicates a lacquered finish, giving the banding a completed surface that is ready for installation on finished components.
The 15/16 inch width on this Rehau PVC edgebanding gives installers a predictable margin when running parts through an edgebander, which helps keep slight panel thickness variations covered while still trimming back to a flush edge. The .018 inch thickness keeps overall buildup low at the edge, which supports clean transitions between banded edges and adjacent surfaces on cabinet doors, drawer fronts, and casework. The PVC edge banding format is suited to hot-air or hot-melt edge banding machines designed for PVC, so shops can run it within existing equipment parameters for this material type. The 600 FT description signals an extended-length roll, which supports uninterrupted runs on production edgebanders and reduces changeovers during cabinet or fixture jobs.
This Rehau PVC Edgebanding, 302164-587, sits in the edgebanding category, aligning it with cabinet, furniture, and fixture production where exposed panel edges need a finished look. The 15/16 inch width matches common 3/4 inch engineered wood panels used in casework, which allows consistent coverage across cabinet sides, shelves, and tops. Because it is an edge banding product class, it fits naturally into workflows that finish cut-to-size components before edgebanding, helping shops organize operations around panel processing lines. The CP41484 embossed reference connects this banding to a specific embossed design, so casegoods, fronts, and shelves can share a consistent edge texture across an installation. The lacquer-described surface supports use on visible cabinet edges, reception counters, and display fixtures where the edge is part of the finished appearance, helping projects maintain a uniform visual standard.
The 15/16 inch by .018 inch sizing gives a balance between coverage and minimal buildup, which helps edgebanders trim edges cleanly without excessive material removal passes. The thin .018 inch profile responds efficiently to the heating stage on PVC-capable edgebanders, supporting reliable bonding along long runs without heavy thermal input. As a PVC edge banding, it interacts predictably with standard PVC glue systems and pressure roller setups, helping operators hold settings across different jobs using the same material family. The 600 FT length designation allows long sequences of parts to run with one roll change, which supports consistent setup conditions, fewer stops, and more uniform edges across a batch. With the embossed, lacquer-related description, the surface presents as a defined finish layer, which lets shops route, trim, and buff edges to a repeatable appearance that matches the intended design line.
Rehau PVC edgebanding 302164-587 is a PVC edge banding from Rehau, Inc., used to finish and protect exposed panel edges on cabinet, furniture, and similar woodworking projects.
This Rehau PVC edgebanding is described as 15/16 inch by .018 inch, giving coverage suited to common 3/4 inch panels while keeping the edge profile relatively thin after trimming.
The 15/16 inch width provides slight overhang on 3/4 inch panels, allowing trimming on both faces, which supports clean, flush edges with minimal risk of exposing the core.
The .018 inch thickness keeps the banding slim, which helps heat reach the bond line effectively and supports smooth transitions between edge and face after trimming.
The CP41484 embossed lacquer description points to an embossed, lacquer-related surface, giving the banding a defined texture and finished appearance for visible cabinet edges.
The 600 FT length provides an extended run of material, allowing many cabinet or casework parts to be processed from one roll, which supports consistent setup conditions on edgebanders.
This Rehau PVC edgebanding, 302164-587, combines a 15/16 inch width, .018 inch thickness, and embossed lacquer-referenced surface to support clean, consistent cabinet and panel edges. The 600 FT length suits production lines aiming for fewer roll changes and uniform results. For projects built around PVC edgebanding processes and 3/4 inch panel stock, this edge banding aligns dimensions, material, and finish with typical shop workflows so parts move from cutting to edging to assembly with a matching, finished edge.
Sold In: 1 Roll