Rehau PVC edgebanding 302164-588 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cut panels present a uniform, professional edge in woodworking projects. The 15/16 inch width stated in the SAP description 15/16X.018 CP41485 EMB LAC 600FT gives coverage for standard panel thickness with a slight overhang for trimming, which supports tight, flush edges after routing or knife trimming. The .018 inch thickness in the same description indicates a thin edgeband that follows panel contours with less resistance, which helps during application on straight runs and gentle curves. The CP41485 EMB LAC reference in the SAP description specifies the particular design and surface style, which lets shops match this edgebanding to panels or existing jobs that call out CP41485 EMB LAC. The 600FT length identified in the SAP description provides extended continuous footage, which supports longer production runs before changing rolls.
The SAP description 15/16X.018 CP41485 EMB LAC 600FT defines critical installation dimensions, so edge banders and hand-application setups can be configured around known width and thickness. The 15/16 inch width stated there allows slight overhang on common panel thicknesses, which simplifies aligning the band on the edge while still leaving material to trim cleanly. The .018 inch thickness in that description identifies a thinner edgeband, which responds predictably under pressure rollers or hand rollers during bonding. The CP41485 EMB LAC designation in the SAP description points to a specific decorative and surface style, which supports visually consistent installs wherever that same specification appears on plans or material schedules.
The product name Rehau PVC Edgebanding, 302164-588 identifies this material as PVC edge banding from Rehau, Inc., which positions it for use wherever drawings call out Rehau 302164-588. The category Miscellaneous|Edgebanding and product class Edge Banding show it is intended for finishing exposed edges on panels, which supports typical applications like cabinets, casework, and other woodworking assemblies using edged sheet goods. The SAP description 15/16X.018 CP41485 EMB LAC 600FT specifies a 15/16 inch width, so it spans the thickness of standard panels with enough material beyond each face for trimming, which is useful on production edge banders and handheld trimmers. The .018 inch thickness in that same description designates a lighter-gauge band, which follows straight or slightly curved edges without excessive stiffness, helping maintain even contact along the glue line. The CP41485 EMB LAC reference in the SAP description identifies a defined design style, which lets shops keep color and texture continuity when this code appears in job documentation.
The manufacturer part number 302164-588 provides a precise identifier, which simplifies reordering the same edgebanding when a project or customer standard specifies this exact code. The Rehau, Inc. brand association in the product data ties the edgebanding to a recognized manufacturer name, which helps shops align this material with other Rehau-specified components on the same job. The SAP description 15/16X.018 CP41485 EMB LAC 600FT shows that width, thickness, and design are all defined in a single reference, which aids in matching machine settings and material libraries to this specific band. The 600FT length stated there gives a clear measure of available footage, which supports planning edge banding runs around roll capacity and estimating how many pieces or cabinets can be processed before changing material. The classification under Edge Banding signals its role as the finishing strip over raw panel edges, which helps organize it correctly in shop inventory for quick access during assembly stages.
Rehau PVC edgebanding 302164-588 has a 15/16 inch width stated in the SAP description 15/16X.018 CP41485 EMB LAC 600FT, which covers standard panel thickness with margin for trimming.
Rehau 302164-588 edge banding has a .018 inch thickness in the SAP description, which provides a thin profile that conforms well during edging and trimming operations.
The CP41485 EMB LAC reference in the SAP description designates the specific design and surface style, which supports visual matching to panels and other components calling for that code.
Rehau edgebanding 302164-588 is listed with 600FT in the SAP description, which provides extended footage for longer production runs or multiple projects using the same band.
Rehau 302164-588 is classified under Miscellaneous|Edgebanding with product class Edge Banding, which identifies it as material for finishing exposed panel edges.
This PVC edgebanding 302164-588 is from Rehau, Inc., as stated in the product data, which ties it to that specific manufacturer name and part system.
Rehau PVC Edgebanding, 302164-588 combines a 15/16 inch width, .018 inch thickness, and the defined CP41485 EMB LAC design from the SAP description, which aligns it with drawings that name this exact material. The 600FT length listed there provides known footage for planning edge work and material usage on cabinets or other edged assemblies. Using the manufacturer part number 302164-588 and the category Edge Banding together supports accurate selection when a project or customer standard points to this specific Rehau PVC edgebanding for finishing exposed panel edges.
Sold In: 1 Roll