Rehau PVC edgebanding 302164-590 is a PVC edge banding strip from Rehau, Inc. that covers raw panel edges so exposed board is concealed and the edge presents a unified surface. The 15/16 inch width spans standard panel thicknesses with margin for trimming, which supports a flush, finished edge line. The .018 inch thickness keeps the banding low profile, so trimmed corners feel smooth and the edge does not appear bulky. The CP21118 designation identifies a specific design and tone, which helps align this banding with matching board or laminate in repeat work. The EMB LAC description distinguishes the finish style, so visible edges follow the same appearance standard from job to job. The 600FT length is suited to multi-part cabinet or fixture runs, allowing long sequences of doors, drawer fronts, or shelves to use the same lot of material.
This Rehau PVC edge banding measures 15/16 inch in width, giving installers enough overhang to trim both faces after bonding so the final edge can align precisely with the panel. The .018 inch thickness defines a thin profile that responds predictably to standard trimming tools, helping edges cut cleanly without leaving an oversized lip. The PVC composition matches common PVC edge banding practice, so bending, cutting, and flushing steps can follow familiar routines. The 600FT continuous format supports uninterrupted runs along multiple cabinet components, which helps maintain appearance continuity across doors, drawer fronts, and exposed shelves within the same project.
The Rehau PVC edgebanding 302164-590 functions as edge banding for panel-based construction where PVC is specified. The 15/16 inch width is suited to edging panels that fall within that span, giving extra material to trim for a finished line on both faces. Because it is PVC edge banding, it aligns with cabinet and furniture projects that already rely on PVC for durability and a consistent look. The CP21118 EMB LAC description identifies the specific appearance, so jobs using that design can maintain the same visual along verticals, horizontals, and door edges. The 600FT length supports higher piece counts in a single project or small production runs, allowing many parts in a set to share the same edgeband source.
The 15/16 inch width on this Rehau PVC edge banding provides overhang beyond the panel faces, helping trimming tools register cleanly and produce uniform edges across repeated parts. The .018 inch thickness allows the edge band to sit close to the panel surface after flushing, which reduces the transition that might otherwise catch light or feel uneven. The CP21118 EMB LAC designation keeps the appearance defined, so when installers return to the same project standard, they can rely on this part number to repeat color and finish without reselecting by eye. With 600FT available, longer production or multi-room installations can continue with the same roll, helping edges across doors, drawer banks, and casework maintain a continuous look from piece to piece.
Rehau 302164-590 is a PVC edgebanding from Rehau, Inc., so it is used to cover panel edges and present a finished edge instead of an exposed core.
This Rehau PVC edgebanding is 15/16 inch wide, providing enough overhang on typical panels so both faces can be trimmed flush for a clean edge line.
The .018 inch thickness defines a thin PVC edge banding profile, which supports smooth trimming and helps the finished edge transition closely to the panel surface.
The Rehau PVC edgebanding roll 302164-590 is 600FT long, allowing many cabinet or furniture parts to be edged from a single continuous length.
CP21118 EMB LAC identifies the specific appearance of this PVC edge banding, helping align panel edges with the same design standard across related projects.
This PVC edgebanding is manufactured by Rehau, Inc., so jobs using Rehau edge solutions can match this product by the 302164-590 part number.
The Rehau PVC edgebanding 302164-590 combines a 15/16 inch width, .018 inch thickness, and 600FT length to support continuous work on panel-based projects. The CP21118 EMB LAC designation keeps appearance tied to a defined standard, which supports consistent edges across related jobs. For cabinet, furniture, or fixture runs planned around this specification, choosing this edgeband allows edges throughout the project set to follow the same material, size, and design reference.
Sold In: 1 Roll