Rehau PVC edgebanding 302164-615 is PVC edge banding from Rehau, Inc. that finishes exposed panel edges so they look clean and protected on cabinet and woodworking projects. The product is classified as Edge Banding, which keeps the focus on covering raw board edges where panels are cut or machined. The 15/16X.018 CP20018 EMB LAC 600' CO description indicates a 15/16 inch wide, .018 inch thick PVC strip, giving coverage across standard panel thicknesses while keeping a slim profile. That width lets you slightly overhang most common substrates, then trim flush for a straight, consistent edge. The .018 inch thickness keeps the edge light and easy to handle while still providing a defined transition line along doors, drawer fronts, and casework parts.
The SAP description 15/16X.018 CP20018 EMB LAC 600' CO defines the working dimensions that matter during installation. With 15/16 inch width, the strip extends past both faces of common casework and door panels, so trimming tools or an edgebander can cut back to a straight, uniform line. The .018 inch thickness is thin enough to follow panel edges smoothly while still giving a visible, controlled edge line once trimmed. The 600 foot length supports processing many parts in sequence, helping maintain consistent setup on edgebanding equipment across a full run of doors, drawer fronts, or cabinet ends.
This product is identified as Rehau PVC Edgebanding, 302164-615, under the Edge Banding class, so its role is to finish exposed panel edges in woodworking and cabinet-related work. The 15/16 inch width from the 15/16X.018 detail makes it well suited to edging typical cabinet sides, shelves, and doors where the substrate thickness pairs well with a near one-inch band. That width allows slight overhang beyond both panel faces, which is useful when running pieces through an edgebander or trimming by hand for a flush edge. The PVC construction referenced in the product name aligns with edgebanding tasks on engineered wood, helping create a consistent look along cut edges. The 600' CO notation indicates one continuous 600 foot length, which serves shops that process many similar parts and want the same color and profile across an entire job without switching rolls midstream.
The 15/16X.018 CP20018 EMB LAC 600' CO SAP description gives a clear read on how this edgebanding behaves during installation. At 15/16 inch wide, it offers enough margin over common board thicknesses, so parts can move through an edgebander with reliable glue-line coverage and predictable trimming. The .018 inch thickness supports a precise, low-profile edge that works well when pieces are stacked, nested, or fitted together in casework assemblies. Because the roll length is specified as 600 feet, a shop can set up for a run of doors or components and stay on the same Rehau PVC Edgebanding 302164-615 for the duration of a project, helping maintain color and edge consistency from the first piece to the last.
Rehau PVC Edgebanding 302164-615 is PVC edge banding classified as Edge Banding, so it is used to finish and protect exposed panel edges on woodworking and cabinet components.
Rehau PVC Edgebanding 302164-615 is described as 15/16X.018, meaning approximately 15/16 inch wide and .018 inch thick, giving coverage and a slim profile for trimming flush to panels.
Rehau PVC Edgebanding 302164-615 is identified with 600' CO in the SAP description, indicating a 600 foot length suitable for extended production runs or multiple projects.
Rehau PVC Edgebanding 302164-615 is described as PVC edgebanding, so it is made from PVC, supporting edge finishing in woodworking and cabinet applications.
Rehau PVC Edgebanding 302164-615, listed as Edge Banding in the edgebanding category, is applied to exposed edges of cabinet parts, shelves, and panels to cover raw substrate.
Rehau PVC Edgebanding 302164-615 at 15/16 inch width gives coverage across typical panel thicknesses with some overhang, supporting accurate trimming to a clean, flush finished edge.
Rehau PVC Edgebanding 302164-615 combines a 15/16 inch width, .018 inch thickness, and 600 foot length to support straightforward edge finishing on cabinet and woodworking projects. The Edge Banding classification and PVC material focus this product on covering cut panel edges so they look uniform across a job. With a defined manufacturer part number 302164-615 from Rehau, Inc., it offers a repeatable choice when the same size and appearance are needed on future work. For projects that call for this specific Rehau PVC edge banding size and material, Rehau PVC Edgebanding 302164-615 from Wurth Baer Supply provides a clear, job-ready option.
Sold In: 1 Roll