Rehau PVC edgebanding gives cabinet and casework builders a dedicated edge material for covering exposed panel edges, so raw substrates are concealed and prepared for finished installations. This Rehau, Inc. product is identified as Rehau PVC Edgebanding, 302164-616, tying directly to the manufacturer part number for consistent reorders across projects. The SAP description 15/16X.018 CP10087 EMB LAC 600FT states that the banding is approximately 15/16 inch wide and .018 inch thick, so it matches common panel thicknesses while staying slim enough to handle well on edgebanders or hand trimmers. The CP10087 EMB LAC designation points to a specific embossed lacquer surface, giving the edge a defined texture and sheen that visually coordinates with matching panels. With a 600FT length designation in the SAP description, this roll is set up for longer production runs and repeat cabinet components without frequent material changes.
The SAP description 15/16X.018 CP10087 EMB LAC 600FT defines the working dimensions and finish, giving installers a predictable setup for their edge banding equipment. The 15/16 inch width provides coverage across standard panel edges with a small margin for trimming flush, which supports clean alignment without requiring unusual settings. The .018 inch thickness keeps the profile slim, so cutters and trimmers can process the edge smoothly during finishing passes. The CP10087 EMB LAC designation signals that the banding carries an embossed lacquer surface, which presents a consistent appearance along the entire 600-foot length, helping multi-piece cabinet runs maintain a uniform finished edge.
This Rehau PVC Edgebanding, 302164-616, sits in the Edgebanding category and Edge Banding product class, aligning it with cabinet, furniture, and casework edge finishing tasks. The 15/16X.018 dimension from the SAP description positions the material for use on panel edges that need full coverage plus a slight overhang, which is common on cabinet doors, drawer fronts, and carcass components. The 600FT length addresses workflows where repeated parts share the same edge finish, such as banks of cabinets or multiple rooms using one specification. Because the banding is identified as PVC, it integrates naturally into woodworking shops already using PVC edgeband on melamine, laminate, or similar panel constructions in their regular production.
The combination of the Rehau brand and the specific manufacturer part number 302164-616 helps production managers and installers specify the same edgeband across drawings, purchase orders, and field work, reducing color or texture mismatches when projects extend over time. The CP10087 EMB LAC finish code gives a clear reference for the embossed lacquer surface, so matching edge appearance can be maintained when panels are cut from coordinated materials. The .018 inch thickness described in the SAP data offers a predictable profile for edgebanders and trimmers, which supports consistent settings and reduces rework from chipping or uneven cuts. The 600FT roll length in the description further supports repeatable results by allowing longer uninterrupted runs of edge banding on similar parts, helping batch work stay visually uniform from the first component to the last.
Rehau PVC Edgebanding, 302164-616, is in the Edgebanding category and Edge Banding product class, aligning it with finishing exposed panel edges on cabinets, furniture, and general casework projects.
The 15/16X.018 designation in the SAP description indicates a banding about 15/16 inch wide and .018 inch thick, providing full edge coverage with a trim margin while remaining thin for smooth cutting and trimming.
The CP10087 EMB LAC code identifies an embossed lacquer surface, so the edgebanding presents a specific texture and sheen that supports visual coordination with matching decorative panels on a project.
The 600FT length in the SAP description supports longer edge banding runs on repeated cabinet parts, helping shops process multiple components in sequence without frequent material changes during a job.
The manufacturer part number 302164-616 ties directly to Rehau PVC Edgebanding with this size and finish, helping buyers repeatedly source the same material when extending or matching previous installations.
The PVC designation in the product name indicates a thermoplastic edgeband commonly used in woodworking, supporting processing with standard edge banding machinery and hand tools in cabinet shops.
The Rehau PVC Edgebanding, 302164-616, combines a defined size of 15/16X.018 with the CP10087 EMB LAC embossed lacquer finish and a 600FT length, giving cabinet and casework shops a repeatable edge solution. By matching orders to this exact manufacturer part number, projects that rely on consistent texture, sheen, and edge coverage can carry the same material from initial fit-out through later additions, keeping panel edges visually aligned across all components.
Sold In: 1 Roll