Rehau PVC edgebanding 302164-621 - 15/16 x .018

Rehau PVC Edgebanding 302164-621 For Clean Panel Edges

Rehau PVC edgebanding 302164-621 is PVC edge banding designed to finish exposed panel edges on woodworking projects. The SAP description 15/16X.018 CP21159 EMB LAC 600FT identifies it as 15/16 inch wide, .018 inch thick edgebanding in a 600 foot length, so it supports longer production runs without frequent material changes. The PVC construction defines it as a plastic edge treatment that covers raw substrate, helping create a uniform finished look on compatible panels. The Rehau, Inc. brand positions it within a recognized edge banding line, which matters when matching material families across a job. As an Edge Banding product in the Miscellaneous|Edgebanding category, it fits into standard edgebanding workflows for cabinet, furniture, or fixture work where raw panel edges need a dedicated finishing material.

Key Rehau PVC Edgebanding Details For Pros

• The 15/16 inch width from the 15/16X.018 CP21159 EMB LAC 600FT description gives coverage that suits typical panel thicknesses, helping installers trim back to a flush, finished edge during processing.
• The .018 inch thickness called out in the SAP description defines a relatively thin edge layer, which supports tight edge transitions when trimming and reduces the step between the face material and the edge.
• The 600 foot length specified in the SAP description supports extended runs on the edgebander, which limits coil changes and helps maintain consistent setup over multiple cabinets or panels.
• The PVC material identified in the Rehau PVC Edgebanding product name provides a plastic edge surface, which works with typical edgebanding machinery and creates a defined barrier over the panel core.
• The manufacturer part number 302164-621 ties this edgebanding to a specific Rehau, Inc. reference, which helps shops reorder the exact same edge material for follow-up jobs and repairs.

Edgebanding Size And Material For Installation Control

The 15/16 inch width listed in the 15/16X.018 CP21159 EMB LAC 600FT description gives installers a narrow overhang beyond common panel thicknesses, which simplifies trimming and reduces waste along the edge. The .018 inch thickness defined in that same description sets expectations for how the band will cut and scrape on an edgebander, allowing dialed-in knife and scraper settings. Being PVC edgebanding means the material is suited to typical PVC-capable edgebanders, so shops can run it within established temperature and feed setups appropriate for this type of plastic edge banding.

How This Rehau PVC Edgebanding Fits Shop Work

Using Rehau 302164-621 On Panel Edges

The Rehau PVC edgebanding, 302164-621, is identified as Edge Banding in the Miscellaneous|Edgebanding category, so it serves as the edge treatment on panels where exposed core needs to be covered. The 15/16 inch width from the 15/16X.018 CP21159 EMB LAC 600FT description positions it well for edging panels that fall under that dimension, enabling a slight overhang for trimming while still tracking well through edgebanding guides. The .018 inch thickness defines a light profile along the edge, so after trimming, the transition to the panel face remains subtle, which is important when panels are viewed up close in cabinets or fixtures.

The PVC material called out in the Rehau PVC edgebanding name indicates a plastic edge that responds predictably to typical edgebander heating and pressure settings, helping operators maintain consistent bond lines along the run. The 600 foot length specified in the SAP description supports grouping multiple components into one setup, which is useful for cabinet shops scheduling series production. The Rehau, Inc. brand and manufacturer part number 302164-621 together give shops a stable reference for future runs, so replacement panels or added cabinets can use the same edge banding for visual continuity across projects.

Details That Support Repeatable Edgebanding Results

The defined 15/16 inch width in the 15/16X.018 CP21159 EMB LAC 600FT identifier helps operators choose guides and pressure settings that match this strip size, which supports straight tracking and controlled trimming on edgebanders. The .018 inch thickness specification affects how trim and scraper stations interact with the edge, so knowing this dimension helps reduce adjustment time between materials and supports a more consistent final edge across a batch.

The 600 foot length stated in the SAP description offers enough material to process many parts from a single roll, which helps maintain the same width and thickness characteristics for all edges within a project. The classification as Edge Banding and the PVC designation in the product name establish its role firmly as a plastic edge solution within standard edgebanding operations, so installers can align it with equipment and workflows built around PVC edge materials.

Common Questions About Rehau PVC Edgebanding 302164-621

Select Rehau 302164-621 Edgebanding For Your Next Run

Rehau PVC edgebanding 302164-621 combines a 15/16 inch width, .018 inch thickness, and 600 foot length as stated in the 15/16X.018 CP21159 EMB LAC 600FT description, aligning well with common panel edging workflows. As Edge Banding from Rehau, Inc., it serves as a defined PVC solution for covering exposed panel cores on cabinetry, furniture, or fixtures where a consistent edge profile matters. Use the manufacturer part number 302164-621 when planning material for upcoming jobs so this same PVC edgebanding can support uniform edges across your production.