Rehau PVC Edgebanding 302164-627 15/16 x .018

Rehau PVC Edgebanding 302164-627 For Clean Edges

Rehau PVC edgebanding 302164-627 is a PVC edge banding from Rehau, Inc. in the 15/16 x .018 CP10105 EMB LAC 600FT specification, so it is sized for covering exposed board edges where a narrow, consistent strip is needed over a long run. The 15/16-inch width gives coverage across common board thicknesses with enough tolerance for trimming, which supports tight visual alignment along cabinet and furniture parts. The .018-inch thickness keeps the banding slim, so it conforms closely to the substrate while leaving minimal material to flush, which helps streamline edge-finishing passes. The CP10105 EMB LAC description identifies a specific decorative and surface configuration, so matching to existing Rehau work using the same code stays straightforward across a project. The 600FT length designation indicates a long continuous run, so repeated edge work on multiple panels can be handled from the same material batch.

Key Edgebanding Details That Support Your Build

• This product is identified as Rehau PVC edgebanding, so it uses a PVC edge banding construction that suits woodworking applications where a durable, uniform edge strip is required along panel edges.
• The 15/16 x .018 CP10105 EMB LAC 600FT specification defines width, thickness, surface description, and length, so installers can match this edgeband to layout, trimming setup, and run length planning on cabinet or furniture jobs.
• The product sits in the Edge Banding product class and Edgebanding category, so it is intended for use where exposed board edges need a finished strip that coordinates with surrounding materials in woodworking assemblies.
• The Manufacturer Part # 302164-627 provides an exact identifier for this Rehau PVC edgebanding, so shops can reorder the same edge material for future runs or replacement tasks that must track an established finish.
• The SAP description 15/16X.018 CP10105 EMB LAC 600FT restates the working dimensions and finish code, so purchasing and shop staff can coordinate on the same specification from ordering through edge-processing steps.

Dimensional Details That Guide Edgeband Setup

The 15/16-inch width listed in the 15/16X.018 CP10105 EMB LAC 600FT description establishes how this Rehau PVC edgebanding sits on standard panel edges, giving a modest overhang for trimming while covering the board face-to-edge junction. The .018-inch thickness in the same description keeps the banding relatively thin, so trimmers and edge-processing equipment can remove slight overage without heavy passes, which supports smoother workflow on multiple parts. The 600FT length in the specification indicates a long coil quantity, so a single product reference supports extended runs of edge work without frequent material changes during production.

Using This Rehau PVC Edgeband In Shop Work

Where Rehau PVC Edgebanding 302164-627 Fits

This product is defined as Rehau PVC edgebanding in the Edge Banding product class, so it is oriented to woodworking and cabinet-related edge treatment where a PVC strip is preferred over raw board. The 15/16-inch width specified in 15/16X.018 CP10105 EMB LAC 600FT positions it for panel edges that approach nominal 3/4-inch board thickness, providing slight overage along both faces that suits standard trimming practices. Because the SAP description and Manufacturer Part # 302164-627 are tied to a CP10105 EMB LAC identification, shops working with the same Rehau reference can keep edge appearance consistent across matching components. Being categorized under Miscellaneous|Edgebanding indicates it functions as a general-purpose PVC edge banding within that family, so it can be assigned anywhere a compatible CP10105 EMB LAC finish is used on board faces.

Details That Support Repeatable Edge Results

The .018-inch thickness documented in the 15/16X.018 CP10105 EMB LAC 600FT SAP description sets expectations for how this Rehau PVC edge banding behaves under trimming and finishing passes, allowing operators to tune settings around a predictable material cross-section. The 600FT length figure ties directly to production planning, because a single coil quantity can cover multiple cabinets or furniture pieces that share the CP10105 EMB LAC finish reference while staying within one part number, 302164-627. Keeping the Manufacturer Part # 302164-627 as the central identifier links purchasing and shop operations, so the same Rehau PVC edgebanding is used whenever that specific CP10105 EMB LAC configuration is required. The combination of Edge Banding product class and PVC construction means this material is intended to function as the exposed edge surface on panels, providing a defined profile that supports flush edge transitions when processed correctly.

Common Questions About Rehau PVC Edgebanding 302164-627

Select Rehau PVC Edgebanding 302164-627 For Matching Runs

Rehau PVC edgebanding 302164-627, defined by the 15/16X.018 CP10105 EMB LAC 600FT specification, gives shops a consistent PVC edge banding sized for panel work that needs a CP10105 EMB LAC finish reference. Using the exact Manufacturer Part # 302164-627 through Wurth Baer Supply ties ordering directly to the same dimension and finish description that shop staff rely on at the edgebander, supporting aligned results across repeated cabinet or furniture runs.