Rehau PVC edgebanding 302164-643 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so they present as a continuous surface. The 15/16 inch width covers typical board thickness with some overhang, giving room to trim back to a tight, straight line. The .018 inch thickness keeps the edge profile slim, so it follows the panel face closely and helps parts stack and align as expected. The CP20275 designation identifies the specific pattern or color family, supporting visual alignment with matching sheet stock on the job. The EMB LAC note flags an embossed, lacquer-treated surface that gives the edge a defined texture and sheen to coordinate with the face material. Supplied in a 600 foot length, it supports longer production runs or multiple cabinets from a single roll.
This PVC edge banding in 15/16 inch width gives working room to align the strip on the edge and trim back, which supports accurate flush trimming along both faces. The .018 inch thickness lets the banding flex with normal panel tolerances, helping it track around straight sections with a profile that stays close to the board. The EMB LAC embossed lacquer surface pairs with the CP20275 reference to create a defined look, so the finished edge presents a consistent appearance across multiple parts on the same project. With 600 feet available, the roll length supports setting up for repeated edges without frequent roll changes.
This Rehau PVC edgebanding, classified as edge banding in the edgebanding category, is suited to woodworking projects where exposed panel edges need a PVC-based finish. The 15/16 inch width works with common board thicknesses found in cabinetry, casework, and similar assemblies, giving consistent coverage along vertical sides and horizontal shelves. The CP20275 designation ties the strip to a defined appearance, so it serves well when panels and edging share that same reference. The embossed lacquer surface noted by EMB LAC provides a finished edge character that visually supports doors, drawer fronts, and carcass panels using matching decorative material from the same system.
The Rehau 302164-643 part number and CP20275 reference give a precise identifier, helping shops return to the same look whenever they need additional edgebanding for follow-up work or repairs. The .018 inch thickness means the banding adds only a thin layer at the edge, supporting tight reveals where panels meet and helping hardware-mounted fronts align closely with cases. The 600 foot roll length supports batching multiple components in a single run, so sets of doors or cabinet sides share the same lot and appearance. As a PVC edge banding from Rehau, Inc., this product slots into workflows that already rely on PVC-based edgebanding in similar dimensions.
Rehau 302164-643 PVC edgebanding is 15/16 inch wide, giving coverage over standard panel thickness with enough overhang to trim the edge back to a clean, flush line.
This Rehau PVC edgebanding has a .018 inch thickness, creating a slim profile that follows the panel face closely and supports tight alignment between adjacent parts.
The CP20275 designation identifies the specific appearance reference for this Rehau PVC edgebanding, supporting visual consistency when matching it to panels using the same code.
The EMB LAC notation indicates an embossed lacquer surface on the edgebanding, giving the edge a textured, finished look that coordinates with treated decorative panels.
The Rehau 302164-643 PVC edgebanding roll is 600 feet long, supporting extended production runs or multiple cabinet projects from a single roll length.
Rehau 302164-643 edge banding is described as PVC edgebanding, so it uses a PVC material suited to edge finishing in woodworking applications.
Choose Rehau PVC edgebanding 302164-643 when a 15/16 inch by .018 inch PVC strip with CP20275 appearance and an EMB LAC embossed lacquer surface matches the project requirements. The 600 foot length supports shop runs where consistent edge treatment across multiple panels, doors, and case parts is a priority.
Sold In: 1 Roll