Rehau PVC edgebanding 302164-647 is a PVC edge banding designed to cover and protect exposed panel edges in cabinet and woodworking projects. The 15/16 inch width gives coverage across standard panel thicknesses with a small overhang, which supports flush trimming and a clean finished line on doors, drawer fronts, and casework. The .018 inch thickness keeps the banding low profile on the edge, which helps maintain a crisp transition from face material to edge without a bulky look. Being PVC, this banding provides a uniform, consistent surface along the run, which simplifies matching multiple components within the same job. The 600 ft length in the SAP description suits longer production runs, so shops can process many parts from a single roll and reduce changeovers during edging operations.
This Rehau PVC edge banding uses a 15/16 inch width, which provides coverage across the panel edge with excess for trimming, supporting accurate flush finishing on straight runs. The .018 inch thickness sets a thin edge, so the transition from the face material to the banded edge stays tight and controlled. With 600 ft indicated in the SAP description, a single roll supports edging many linear feet of cabinetry, shelving, or panels in one continuous workflow. These dimensions work together to support straightforward feeding through edgebanders and consistent trimming when building casework, fronts, and other panel-based components.
This Rehau PVC edgebanding, identified as 302164-647 and classified under edge banding, is positioned for use on cabinet and woodworking projects where exposed panel edges need a finished surface. The 15/16 inch width supports edging panels that align with common cabinet constructions, giving a bit of overhang so the final edge can be trimmed flush. In a shop setting, the 600 ft length in the SAP description suits repeated runs of shelves, cabinet sides, tops, and fronts, allowing many parts to be processed from one roll. Because it is PVC edge banding, it provides a continuous, uniform edge material for casework, modular components, and other panel-based assemblies that benefit from a consistent perimeter finish.
The defined 15/16 inch by .018 inch sizing gives installers and shop operators predictable behavior through edgebanders and trimmers, which supports repeatable, straight edges across multiple parts. The thin .018 inch profile helps reduce any noticeable step between the face material and the edge, which matters when assembling doors and drawer fronts that sit side by side. With the product clearly identified as Rehau PVC edgebanding 302164-647, repeat orders can rely on the same dimensions and material type, helping maintain visual continuity across phases of a project or between initial work and later additions. The 600 ft length called out in the SAP description supports longer production sequences, which reduces setup interruptions and helps keep feed and trim settings consistent over many pieces in a run.
Rehau 302164-647 is a PVC edge banding classified as edgebanding, so it is used to cover and finish exposed panel edges in cabinet and woodworking projects.
This Rehau PVC edgebanding is 15/16 inch wide and .018 inch thick, which provides coverage for standard panel edges with a slim profile that supports flush trimming.
The 600 ft length noted in the SAP description supports long edging runs, allowing many cabinet or panel parts to be processed from a single roll during production.
This Rehau 302164-647 product is PVC edgebanding, providing a uniform, consistent edge surface along cabinet and woodworking components.
The .018 inch thickness keeps the edge banding slim, which supports a tight, clean transition between the panel face and the edge on finished cabinetry.
The 15/16 inch width spans typical panel thicknesses with some overhang, helping installers trim back to a precise, flush edge on cabinet parts.
Rehau PVC edgebanding 302164-647 combines defined dimensions of 15/16 inch width and .018 inch thickness with a 600 ft length identified in the SAP description, giving shops a predictable edge material for cabinet and woodworking projects. The PVC construction supports a consistent edge surface across many components, while the width and thickness work with standard edging and trimming operations to produce clean lines. For projects that rely on repeatable sizing and appearance along panel edges, this specific Rehau part number provides a clearly identified option that aligns with common cabinet and casework workflows.
Sold In: 1 Roll