Rehau PVC edgebanding gives you a dedicated edge treatment for panels, so raw substrate edges are covered and visually finished in one continuous material. This Rehau, Inc. product is identified as Rehau PVC Edgebanding, 302254-047, so it ties directly to the manufacturer part number you specify on project paperwork. The product is classified by Wurth Baer Supply under Edge Banding in the Edgebanding category, which aligns it with typical cabinet, furniture, and casework edging tasks in a woodworking environment. The SAP description "15/16X1MM CP20118 LAC 600FT" defines a band that is 15/16 inch wide and 1mm thick, which suits common panel thickness coverage where you want the band to slightly overhang for trimming. The 600FT length identifier points to a long run format that supports multi-piece jobs, so you can run repeated cabinets or components without frequent material changeover.
The "15/16X1MM" detail in the SAP description defines the working size of this PVC edge band, so you know you are dealing with material that is 15/16 inch wide and 1mm thick. That width is suitable for covering the edge of many standard panel thicknesses while still providing a slight overhang, which supports clean trimming after bonding. The 1mm thickness sets your equipment expectations for feed pressure, heat settings, and trimming load on edgebanders or manual tools. Because this product falls under the Edge Banding product class, it is aligned with machinery and hand tools designed around common banding dimensions, so setup and adjustment routines stay consistent between jobs using similar PVC bands.
The Rehau PVC Edgebanding, 302254-047 is positioned by Wurth Baer Supply under Miscellaneous | Edgebanding with a product class of Edge Banding, placing it squarely in typical cabinet, furniture, and casework edge treatment work. The 15/16 inch width from the "15/16X1MM" specification suits many common panel build-ups, letting you apply the band so it slightly overhangs both faces for controlled trimming. With a 1mm thickness, the band provides a defined edge profile that works well for routine residential or commercial cabinetry where you want a consistent feel along doors, drawer fronts, and carcass edges. The CP20118 notation in the SAP description ties this band to a coordinated design reference, which is useful when you align edge material to panels or laminates using the same CP20118 callout on drawings or cut lists. The 600FT length detail means you can keep one run going through your edgebander on larger jobs, helping maintain consistent color and surface appearance from part to part.
The SAP description "15/16X1MM CP20118 LAC 600FT" defines a 15/16 inch wide, 1mm thick PVC edge band, and those dimensions directly affect setup and repeatability on your equipment. A 15/16 inch width gives enough coverage over typical panel thicknesses, so the band extends past both faces, allowing you to trim back to a flush, clean edge without cutting into the face material. The 1mm thickness gives the band a stable profile for trimming knives or flush routers to track against, which supports a uniform final edge line across a full run of parts. Being PVC, the material aligns with settings commonly used for PVC edgebanding on standard woodworking edgebanders, helping you carry proven heat and feed parameters from one Rehau band to another. With the product clearly identified as Rehau PVC Edgebanding, 302254-047, shop personnel can link the correct coil to setup sheets and maintain consistent results whenever this specification appears in a job packet.
Rehau 302254-047 is PVC edgebanding classified as Edge Banding, so it serves as an edge treatment for panel and cabinet components in woodworking projects.
The product SAP description "15/16X1MM" indicates the band is 15/16 inch wide and 1mm thick, giving practical coverage and a manageable thickness for trimming after application.
The 600FT designation identifies a long run of material, supporting extended edgebanding operations on multiple parts without frequent material changes during a job.
The CP20118 notation in the SAP description indicates a specific design reference, so it can be matched to panels or surfaces that use the same CP20118 code in project documentation.
This product is identified as Rehau PVC Edgebanding, 302254-047 with manufacturer part number 302254-047, giving clear traceability from drawings to material selection.
Wurth Baer Supply lists this item under Miscellaneous | Edgebanding with a product class of Edge Banding, aligning it with standard cabinet and furniture edging materials.
Rehau PVC Edgebanding, 302254-047 from Rehau, Inc. combines a defined 15/16 inch width and 1mm thickness with a 600FT length format, giving shops a clear, repeatable choice for panel edging. The CP20118 designation and Edge Banding classification align this product with typical cabinet, furniture, and casework tasks, so it fits cleanly into existing routing and trimming workflows. Specify this Rehau PVC edge band by its full identifier and dimensions when you want consistent edging performance across your next production run.
Sold In: 1 Roll