Rehau PVC edgebanding 302254-079 is a PVC edge banding designed to finish exposed panel edges on cabinetry and similar woodworking projects. The product is identified as Rehau PVC Edgebanding, 302254-079, so it aligns with projects that call out this exact manufacturer part number in shop drawings or purchasing lists. The SAP description 15/16X1MM CP20553 LAC 600FT indicates a 15/16 inch wide, 1mm thick banding, giving a proportion that works well on standard panel thicknesses where a slightly proud edge is preferred before final trimming. The CP20553 LAC reference ties this banding to a specific color or design line, helping maintain visual consistency across panels in the same job. The 600FT detail denotes a continuous 600-foot length, supporting longer production runs and reducing roll changes during casework fabrication.
The 15/16X1MM measurement in the SAP description defines the working dimensions, so installers can set edgebander guides and trimmers to handle a 1mm PVC edge on panels sized for this width. The near-1-inch width gives enough overhang on both faces of common panel thicknesses, which simplifies achieving a clean, flush edge after trimming. Because this is defined as PVC Edgebanding, it is intended for standard PVC-capable edgebanding equipment, allowing shops that already run PVC material to integrate it into existing machine setups. The fixed 1mm thickness also supports predictable heat and feed settings, helping maintain consistent glue lines and edge profiles across a full 600FT run.
This product is classified as Edge Banding under the Miscellaneous|Edgebanding category, so it suits applications where exposed panel edges need a PVC finish rather than raw substrate. The 15/16X1MM size works with common cabinet components, such as case sides, shelves, and applied panels, where that width allows slight overhang for trimming while still looking proportionate on the finished piece. The CP20553 LAC designation connects it to a particular decor program, which supports projects that repeat the same surface design across doors, drawer fronts, and carcass edges. Because the roll length is 600FT, it is well suited to production environments that process many similar parts, such as runs of kitchen or commercial casework that share the same finish specification.
The 1mm thickness called out in 15/16X1MM means every edge receives the same material mass, which helps maintain a consistent profile when running multiple passes on an edgebander. The 15/16 inch width provides predictable overhang on both sides of typical panel thicknesses, letting operators dial in trim units once and hold those settings as they move through a stack of parts. The defined manufacturer part number 302254-079 and CP20553 LAC reference give purchasing and production teams a precise identifier, reducing mix-ups between similar colors or thicknesses and supporting repeatable reorders. The continuous 600FT roll supports long, uninterrupted runs through automatic equipment, which can improve edge quality by keeping machine temperatures and glue application in a steady operating range across many parts.
Rehau PVC Edgebanding 302254-079 at 15/16X1MM provides a 15/16 inch wide, 1mm thick strip, giving overhang for trimming while delivering a consistent, solid edge profile on standard panel thicknesses.
The 600FT length of this PVC edgebanding supports extended production runs on edgebanders, so shops can process many cabinet parts in sequence without frequent roll changes.
The CP20553 LAC designation identifies a specific decor reference, which helps match this PVC edgebanding to coordinating surfaces in projects using the same program.
This 1mm PVC edgebanding gives a more substantial edge than thinner options, supporting a solid-feeling edge on cabinet components after trimming and finishing passes.
Rehau, Inc. branding ties this PVC edgebanding to a named manufacturer, which aligns with project documents that specify Rehau edge banding on cabinetry or millwork.
Manufacturer part number 302254-079 uniquely identifies this Rehau PVC Edgebanding, helping purchasing teams order the exact 15/16X1MM CP20553 LAC 600FT product for repeat jobs.
Rehau PVC Edgebanding, 302254-079, ties together a 15/16 inch width, 1mm thickness, CP20553 LAC decor reference, and 600FT roll length into one defined product, so it aligns well with cabinet and panel projects built around that exact specification. Using the same manufacturer part number across purchasing and production simplifies material allocation when doors, fronts, and carcass parts all call for this PVC edge banding. For shops running repeat jobs or standardized finishes, this defined 15/16X1MM Rehau edgebanding supports consistent results across multiple production cycles.
Sold In: 1 Roll