Rehau PVC edgebanding 302254-118, 15/16 x 1mm

Rehau PVC Edgebanding 302254-118 For Clean Panel Edges

Rehau PVC edgebanding 302254-118 is a PVC edge banding that covers raw board edges, creating a finished transition between the panel face and edge so cabinet and furniture work looks consistent across a run. The 15/16 inch width gives coverage over typical panel thickness with room for trimming, so installers can flush the edge without exposing the substrate. The 1mm thickness provides a defined edge profile that stands out more than thin tape-style edges, which matters when matching existing installations using similar material. The CP20625 LAC reference in the description identifies a specific decor and finish combination, so repeat orders can track the same visual look from job to job. The 600 foot roll length reduces changeovers on site or in the shop, supporting longer production runs and fewer stops during cabinet or fixture builds.

Key Rehau Edge Banding Details For Daily Work

• The 15/16 inch width spans the edge and slight overhang on standard sheet goods, allowing installers to trim back to a clean, straight line for uniform cabinet or furniture edges.
• The 1mm thickness gives this edgebanding a substantial feel on the edge, which supports a more pronounced profile where designers expect the edge detail to visually match similar 1mm installations.
• The PVC material identified in the product name provides a consistent, machinable edge surface, helping shops run standard edgebanding equipment setups without swapping to different material parameters.
• The 600 foot length noted in the description supports extended runs of panels, reducing roll change interruptions on repetitive cabinet components or larger commercial projects.
• The CP20625 LAC reference ties this roll to a specific decor and surface, letting shops align it with jobs or drawings that call out the same reference for visual coordination.

Edgebanding Size And Format For Straightforward Application

This Rehau, Inc. PVC edgebanding is supplied in a 15/16 inch width and 1mm thickness, so it pairs well with common cabinet and furniture panel layouts that use similar edge coverage. The 15/16 inch size provides workable overhang on standard thickness board, which aids in trimming operations because the band can be applied and then flushed back without risking a short edge. The 1mm thickness supports machining passes that treat the edge as a distinct layer, which matters when dialing in trimmers or scrapers to avoid cutting into the core material. With a 600 foot roll length identified in the description, this format fits production environments where repeated parts and longer runs benefit from fewer roll changes during edgebanding cycles.

How Rehau 302254-118 Fits Cabinet And Panel Runs

Using This Edge Banding On Cabinets And Panels

This product is categorized as edge banding under Miscellaneous|Edgebanding, linking it directly to cabinet, furniture, and panel edge finishing tasks where exposed core needs to be covered. The Rehau, Inc. brand association connects this specific 302254-118 part number to a defined color and finish family represented by CP20625 LAC, so projects that specify that reference can rely on the same visual target when selecting this roll. The 15/16 inch width is suited to covering the full thickness of common casework panels while leaving enough material to trim, giving installers flexibility across drawer fronts, doors, and carcass parts using similar dimensions. Because the SAP description lists 600FT, a single roll supports multiple cabinet boxes or a run of panels, letting production sequence edge work across a batch without frequent stock changes.

Details That Support Repeatable Edge Banding Results

The defined 1mm thickness called out in the SAP description helps shops set up trimmers and edgebanders once and repeat that setting whenever they pull this 302254-118 roll, which keeps edge profiles consistent across different jobs using the same material. The CP20625 LAC decor reference links appearance back to a specific identifier, allowing drawings or job notes to call out that exact reference so future replacements or additions line up with earlier work. The 15/16 inch width gives a predictable amount of overhang on standard boards, which supports consistent trimming passes and reduces variation in how much edge is removed on each part. The 600 foot length means that once the machine is dialed in for this Rehau PVC edgebanding, that setup can run for many parts in sequence, supporting steady workflow on both small and larger production runs.

Common Questions About Rehau PVC Edgebanding 302254-118

Select Rehau 302254-118 For Matching Edge Runs

The combination of 15/16 inch width, 1mm thickness, and 600 foot length positions this Rehau 302254-118 PVC edgebanding as a practical choice for cabinet, furniture, and panel work that repeats a specific CP20625 LAC decor. The defined dimensions support predictable trimming and machining, which helps maintain uniform edges when panels move through production. When a job or drawing specifies Rehau PVC edgebanding 302254-118, selecting this part number aligns the material, appearance reference, and roll format so shops can carry that same edge detail across new builds or follow-up work.