Rehau PVC edgebanding 302254-124 is a PVC edge banding product from Rehau, Inc. in the Edgebanding category, designed to cover and finish exposed panel edges so fabricated components present a clean, uniform edge surface. The SAP description identifies a 15/16 inch by 1mm PVC edgebanding, giving you a working width suited to standard panel thicknesses while the 1mm thickness provides a defined edge profile that stands out clearly from the core material. The CP20714 LAC designation further identifies the specific decor or finish family, which helps align this banding with matching components in the same project line. A 600FT length per roll supports longer production runs or multiple cabinet and fixture jobs before material changeover, keeping workflow more continuous.
The stated 15/16 inch width on this Rehau PVC edgebanding gives installers a practical amount of overhang beyond most panel faces, so trimming processes can bring the edge down flush without risking core exposure. The 1mm thickness works with equipment and settings configured for 1mm PVC banding, which supports predictable trimming and scraping results around corners and along straight runs. Because the product is identified as PVC edgebanding in a 600FT length, it fits edge banding machines and manual setups that feed from continuous rolls, allowing a single length to handle multiple components in sequence.
This Rehau PVC edgebanding, classified under Edge Banding and Edgebanding, is suited to projects where exposed panel edges on furniture, cabinets, or fixtures need to be covered with a consistent PVC edge. The 15/16 inch width aligns with panels around three-quarters of an inch thick and similar constructions, giving enough lateral coverage so the banding can be centered, bonded, and then trimmed back to the faces. The 1mm thickness makes it appropriate for installations where a defined but not overly heavy PVC edge is desired, such as many residential and commercial cabinet runs. The CP20714 LAC designation lets shops that work with labeled Rehau decor systems match this banding to other components that carry the same reference, so doors, drawer fronts, and case parts can share a coordinated edge appearance.
The 15/16 inch by 1mm sizing on the 302254-124 PVC edgebanding gives operators a repeatable format: machines and manual jigs can be set once for that width and thickness, which supports consistent trimming and scraping passes from part to part. The 600FT length per roll means long cabinet runs or multiple similar jobs can draw from the same continuous stock, helping maintain the same edge profile and decor across all pieces in a sequence. The defined Rehau, Inc. part number 302254-124 and the CP20714 LAC designation let purchasing and production reference a single, specific product when they need to repeat a successful setup, which reduces variation in edge appearance when jobs are rerun. As a PVC edgebanding, it works within shop processes that are already configured around PVC banding temperatures and feed characteristics, so once parameters are dialed in for this 1mm stock, those settings can be carried forward to future work using the same material.
Rehau PVC edgebanding 302254-124 is described as 15/16 inch by 1mm, so it covers typical panel edges with a small overhang and delivers a 1mm thick PVC edge profile for machining.
The CP20714 LAC description identifies a specific Rehau decor or finish reference, which allows projects to use the same code when matching this banding to coordinating components.
The 600FT length on this PVC edgebanding supports extended production runs, so multiple cabinets or fixtures can be edged from one continuous roll without frequent material changeovers.
Rehau 302254-124 is identified as PVC edgebanding, so it is a PVC edge banding product that suits equipment and workflows designed for thermoplastic PVC banding.
The 1mm thickness provides a defined edge that is substantial enough for trimming and scraping while aligning with setups calibrated for 1mm PVC edgebanding in many cabinet shops.
The 302254-124 part number gives a precise Rehau, Inc. reference, so purchasing and production can request the same width, thickness, and decor on repeat jobs.
The Rehau PVC edgebanding 302254-124 delivers a defined 15/16 inch by 1mm format and a 600FT roll length, giving shops a consistent PVC edge profile for repeated cabinet and panel work. When your drawings or standards call out this specific Rehau part or the CP20714 LAC reference, choosing this edgebanding aligns the job with that requirement so machinery, settings, and finished appearance all follow the same specification.
Sold In: 1 Roll