Rehau PVC edgebanding 302254-137 is a PVC edge banding from Rehau, Inc. that covers and protects exposed substrate edges, so cabinet and furniture projects gain a finished appearance with consistent material at the edge. The 15/16 x 1mm size stated in the SAP description defines a narrow, controlled edge coverage, which suits common panel thicknesses where only the edge face requires banding. The CP60169 reference in the SAP description identifies a specific color or design series, allowing projects that already use this code to keep visual continuity across new or replacement work. The LAC reference in the SAP description points to a defined finish type in Rehau's system, which keeps edge appearance uniform wherever this band is applied. The 600FT length noted in the SAP description supports longer production runs, so continuous edging can be applied across multiple parts with fewer coil changes during fabrication.
The 15/16 x 1mm size called out in the SAP description sets both the visible width and thickness of this Rehau PVC edgebanding, which affects how it sits on typical panel edges and how much material remains after trimming. At 15/16 inch wide, the banding extends just beyond many common panel thicknesses, giving fabricators enough material to trim back to a clean, flush line without excessive waste. The 1mm thickness noted in the SAP description provides a defined edge profile, which influences the feel of the finished edge and the way it transitions to laminate or board faces on cabinets and fixtures.
The Manufacturer Part # 302254-137 links directly to this specific Rehau PVC edgebanding, so shops can tie it to internal material lists and job codes for repeatable ordering on cabinet or furniture programs. The 15/16 x 1mm size from the SAP description suits many panel-based constructions where only the edge requires coverage, giving fabricators a predictable band profile for doors, drawer fronts, and casework parts. Because the SAP description specifies CP60169, projects already designed around that visual reference can extend runs or replace damaged parts while maintaining the same coded look at the edge. The LAC callout in the SAP description provides a defined surface type in Rehau's system, so edges across different components share the same surface character wherever this product is applied. The 600FT length supports production environments that run repeated parts, allowing long stretches of edging work from a single coil for consistent edge results across multiple units.
The combination of 15/16 inch width and 1mm thickness from the SAP description gives installers a known amount of material to apply, trim, and finish, which supports repeatable edge quality from part to part. With the CP60169 code in the SAP description, designers and production staff can specify a single identifier for this edging color or design series, helping keep edge appearance aligned with existing jobs that use the same reference. The LAC notation in the SAP description signals a specific finish classification in Rehau's catalog, so edges across doors, end panels, and cabinet components present the same surface character when this product is chosen. The 600FT length provides enough material for longer cabinet or fixture runs, which supports continuous processing and consistent edges across full batches. Sourcing this banding from Wurth Baer Supply places a Rehau, Inc. PVC edgebanding within a woodworking-focused distribution network, so the product aligns with common cabinet, furniture, and fixture fabrication workflows.
Rehau PVC edgebanding 302254-137 in 15/16 x 1mm establishes both visible width and thickness, giving fabricators a defined band profile for trimming and creating a consistent cabinet or furniture edge.
Rehau PVC edgebanding 302254-137 with CP60169 in the SAP description ties the band to a specific look in Rehau's system, helping projects maintain matching edge appearance across new and existing parts.
Rehau PVC edgebanding 302254-137 carries LAC in the SAP description, pointing to a particular finish classification that keeps edge sheen and surface character consistent on all components using this product.
Rehau PVC edgebanding 302254-137 with a 600FT length in the SAP description supports longer production runs, letting shops process many parts while maintaining uniform edges from the same coil.
Rehau PVC edgebanding 302254-137 at 1mm thickness defines the edge profile, affecting how the edge feels and transitions to the panel face on cabinet and furniture components.
Rehau PVC edgebanding 302254-137 uses that manufacturer part number to specify this exact CP60169 LAC 15/16 x 1mm PVC band, simplifying accurate selection and repeat ordering for projects.
Rehau PVC edgebanding 302254-137 from Rehau, Inc. combines the 15/16 x 1mm dimension, CP60169 designation, LAC finish notation, and 600FT length described in the SAP details to support consistent edges on cabinet and furniture work. Sourcing this PVC edge banding through Wurth Baer Supply connects a defined Rehau part number with woodworking-focused distribution, so professional installers and shop teams can align edge appearance, finish type, and material profile to their project requirements.
Sold In: 1 Roll