Rehau PVC edgebanding, 302254-148, is a PVC edge banding product from Rehau, Inc. This edge banding is identified in SAP as 15/16X1MM CP40618 LAC 600FT, describing its nominal width, thickness, designation, and footage. The 15/16 inch width gives coverage for typical panel thicknesses where a slight overhang can be trimmed for a flush finish. The 1mm thickness provides a defined edge profile that supports durable edging on casework and fronts. The CP40618 designation ties this edgebanding to a specific color and finish match within a coordinated program. The LAC reference identifies the finish type so installers can align the edge appearance with the surface material. The 600ft length supports longer production runs or multiple cabinet projects from a single roll, reducing changeovers. As edge banding, this product is suited to covering exposed panel edges in woodworking and cabinet construction.
This Rehau PVC edgebanding is identified as 15/16X1MM, so its nominal width and thickness are set for edge coverage and trimming allowance on woodworking panels. The 15/16 inch width gives workable overhang for trimmers on standard sheet goods. The 1mm thickness supports an edge profile that feels substantial while remaining practical for standard edgebanding equipment. With a total length of 600FT, this product supports production-oriented shops that run multiple panels or cabinet parts in a sequence. Together, these dimensions help installers plan footage needs, edging passes, and finishing steps around a consistent, known size.
Rehau PVC edgebanding, 302254-148, is classified as Edge Banding under the Edgebanding category, so it fits into cabinet, furniture, and general woodworking applications where exposed panel edges need coverage. The 15/16 inch width suits edges of panels that are close to 3/4 inch, allowing a small overhang on both sides for trimming to a flush line. With a 1mm thickness, this PVC edge banding supports use on cabinet cases, shelves, and similar components where a defined edge profile is desired. The CP40618 LAC designation connects this banding to a specific appearance group within Rehau offerings, making it suitable when a consistent color and finish is required across coordinated parts. The 600FT footage allows this single product reference to serve both short runs and extended edging sequences in a shop environment.
The identified size of 15/16X1MM in the SAP description means installers can anticipate trimming behavior and edge reveal before cutting, which supports planning for equipment setup and finishing standards. The 1mm thickness helps the edge stand up visually against the panel face, which matters when cabinets and casework are viewed at eye level or along long runs. The CP40618 code gives shops a repeatable reference for reorders, so future projects can match existing installations using the same edgebanding identity. The LAC finish code keeps the visual specification tied to a single product, simplifying material lists where the surface and edge need to track together. Because the length is defined as 600FT, buyers can estimate how many linear feet of panel edge can be covered from one roll, which supports job costing and planning cut lists around a predictable supply.
Rehau PVC edgebanding 302254-148 is identified as 15/16X1MM, which defines its nominal width and thickness for planning edge coverage and trimming on cabinet and woodworking panels.
Rehau PVC edgebanding 302254-148 is listed as 600FT, providing 600 feet of edge banding length for continuous cabinet or casework edging runs.
The CP40618 code in the SAP description identifies a specific Rehau PVC edgebanding designation, tying this product to a defined color and finish match within that reference.
The LAC reference in the description identifies the finish type of this Rehau PVC edgebanding, helping align the edge appearance with the chosen surface material in a project.
The 1mm thickness of Rehau PVC edgebanding 302254-148 creates a defined edge profile, supporting a solid-feeling transition between the panel face and the edge band on cabinets.
Rehau edge banding 302254-148 is classified as Edge Banding in the Edgebanding category, fitting cabinet, furniture, and woodworking projects that need PVC coverage on exposed panel edges.
Rehau PVC edgebanding, 302254-148, combines a 15/16 inch width with 1mm thickness and a CP40618 LAC finish designation, giving installers a clear, repeatable specification for cabinet and woodworking edges. The 600FT length supports both shop production and project-based use under one product reference. For projects that rely on matched appearance and known dimensions, this Rehau Inc. edge banding offers a defined width, thickness, and finish code that align with planning, edging passes, and visual consistency across components.
Sold In: 1 Roll