Rehau PVC edgebanding 302254-221 15/16 x 1mm

Rehau PVC Edgebanding 302254-221 For Clean Edges

Rehau PVC edgebanding 302254-221 is a PVC edge banding from Rehau, Inc. that covers and finishes raw board edges on cabinetry and woodworking projects, giving panels a consistent look across exposed edges. The 15/16 inch width works with panels where you need the edging to cover the thickness and a small overhang for trimming, so finished edges line up cleanly with the surface. The 1mm thickness provides a defined edge profile that stands up to day-to-day contact in typical shop and cabinet environments. This edge banding is supplied in a 600 foot length, which supports longer production runs or multiple jobs from a single roll, helping keep edge material consistent across a project. The CP20567 LAC reference in the description identifies the specific decor or finish family, so installers can match this edgebanding to the corresponding panel or laminate design where that code is used.

Key Details Of This Rehau PVC Edgebanding

• This product is a Rehau, Inc. PVC edgebanding, so it ties directly into Rehau edge solutions used throughout many cabinet and woodworking shops, helping maintain system consistency across related materials.
• The 15/16 inch width gives coverage for typical panel thicknesses with trim allowance, so installers can flush-trim both faces and achieve a clean finished edge without exposing the substrate.
• The 1mm thickness creates a sturdy edge profile that resists minor impacts better than thinner tape-style edges, supporting everyday cabinet door and panel use in residential or commercial settings.
• The 600 foot length supports batch runs of multiple cabinets or room-sized projects from one roll, which can streamline material handling and reduce changeovers during production.
• The manufacturer part number 302254-221 and CP20567 LAC description define the exact color and finish reference in the Rehau system, which assists when matching this banding to specific decorative surfaces in a design set.

Edge Banding Dimensions That Support Installation

This Rehau edge banding has a listed size of 15/16 inch by 1mm, giving installers a clear sense of how it will sit on typical panel edges. The slightly oversize 15/16 inch width compared to common panel thicknesses leaves a manageable amount to trim off both faces, which helps edgebanders and handheld trimmers produce a flush result without cutting into the board. The 1mm thickness provides a solid edge that tracks well through automatic edgebanding machines and gives a distinct edge line when used on cabinet doors, shelves, or casework, supporting consistent appearance across a job.

Using Rehau 302254-221 Edgebanding In Daily Work

Where This PVC Edgebanding Fits Best

This Rehau PVC edgebanding belongs in woodworking and cabinet shops that work with board materials needing finished edges. As an edge banding product in the edgebanding category, it is suited to covering exposed edges on casework, shelving, and door fronts where a PVC solution is preferred. The 15/16 inch width aligns with many common panel builds, allowing it to be applied along straight cabinet components in runs. Because it is part of Rehau, Inc.'s edge banding line, it integrates into projects that already specify Rehau surfaces or edging systems under matching codes such as CP20567 LAC. The 600 foot roll length supports both small-batch custom work and repeated production of similar components from the same material, keeping visual continuity across all finished edges in a room or project set.

Why The 15/16 x 1mm Format Matters

The combination of 15/16 inch width and 1mm thickness in this Rehau edge banding affects how it behaves from the machine through to the finished installation. The 15/16 inch dimension offers enough overhang to allow trimming on each side of the panel without risking an under-width edge that could expose the core, which helps reduce rework tied to misaligned cuts. The 1mm gauge gives the edge enough substance to present a defined line along cabinet parts, which many installers favor when aligning doors and drawer fronts visually. As a PVC edge banding, it works within typical woodworking shop processes where edgebanders and trimming tools are set up for similar PVC materials, supporting consistent feed and cut quality. The clearly identified manufacturer part number 302254-221 makes it straightforward to reorder the exact same size and decor when additional runs or matching parts are required later.

Common Questions About Rehau PVC Edgebanding 302254-221

Choose This Rehau Edge Banding For Matching Runs

This Rehau PVC edgebanding 302254-221 combines a 15/16 inch width, 1mm thickness, and 600 foot length to support efficient edging work on cabinetry and woodworking projects. The defined CP20567 LAC reference and manufacturer part number help align this banding with matching Rehau surfaces where that decor is specified. Selecting this edge banding through Wurth Baer Supply ties your work to an established woodworking distributor while keeping size, material, and decor consistent across current and future runs.