Rehau PVC edgebanding 302254-229 15/16 x 1mm

Rehau PVC Edgebanding 302254-229 For Clean Edges

Rehau PVC edgebanding 302254-229 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cabinet and furniture projects present a uniform, professional look. The 15/16 inch width covers typical panel thickness with a small overhang that can be trimmed flush for a crisp edge. The 1mm thickness adds a solid edge detail that stands up to normal shop handling while keeping the profile workable for standard edgebanding tools. The CP20844 designation identifies the specific color or pattern so runs can be matched consistently across multiple jobs. The 600FT length described in SAP data provides a continuous supply for production runs, helping reduce changeovers during repetitive cabinet or casework builds. As an edge banding product in the edgebanding category, it supports woodworking applications where raw substrate edges need to be covered for appearance and to align with design requirements.

Key Rehau PVC Edgebanding Details For Projects

• The PVC edge banding material described in the product name delivers a synthetic edge that covers raw panel cores, which supports finished cabinet and furniture work where exposed substrate is not acceptable.
• The 15/16 inch width referenced in the SAP description spans standard panel edges with room for trimming, which lets installers flush trim both faces to achieve a straight, clean line along doors, drawer fronts, and casework.
• The 1mm thickness in the SAP description creates a defined edge profile that is substantial enough for everyday use areas while staying compatible with common edgebanding equipment and trimming methods in woodworking shops.
• The CP20844 identifier listed in the SAP description specifies a particular Rehau design variant, which helps shops repeat the same visual look across multiple orders or match existing installations that used the same code.
• The 600FT length noted in the SAP description provides extended run capacity from a single roll, which supports uninterrupted processing on edge banders or manual setups during larger production jobs.

Edgebanding Size Details For Fitting Work

The 15/16 inch width documented in the SAP description allows the Rehau PVC edgebanding 302254-229 to cover standard panel thicknesses with slight overage, so edges can be trimmed back to meet the face without exposing the substrate. The 1mm thickness called out in the same description gives the installer a manageable profile that responds predictably to trimming tools, reducing the risk of gouging the panel surface during cleanup passes. As a PVC edge banding in the edgebanding product class, it works as the finishing layer on panel edges, tying into typical cabinet and furniture construction sequences where edges are treated after cutting and machining.

Using This Rehau Edge Banding In Woodworking

Where Rehau PVC Edgebanding 302254-229 Fits

This product is identified as Rehau PVC Edgebanding, 302254-229, placing it in the edge banding role for woodworking and cabinet-related work. The PVC construction described in the product name supports use on panel-based components where a man-made edge is preferred around cores such as those used in casework. The 15/16 inch width from the SAP description allows coverage across typical cabinet panel thicknesses in doors, drawer fronts, and carcass parts, providing enough margin to trim both sides cleanly. Because it is categorized under Edgebanding and Edge Banding, it aligns with workflows that rely on continuous edge material to finish exposed edges on furniture, closets, and commercial fixtures built from sheet goods. The CP20844 code embedded in the SAP description distinguishes this specific visual option from other Rehau offerings, which helps maintain consistent appearance when multiple panels or replacement parts are produced for the same project.

Why The Dimensions Support Consistent Results

The combination of 15/16 inch width and 1mm thickness specified in the SAP description supports repeatable edging results across a range of panel layouts. The slightly oversize width gives installers tolerance for minor panel variation while still allowing tight flush trimming, which contributes to straight visual lines along cabinet runs. The 1mm thickness behaves in a stable way under trimming and scraping operations, limiting flex at the edge and supporting a uniform radius or square profile depending on the finishing technique. As a PVC edge banding from Rehau, Inc., it integrates into typical edgebanding equipment setups that are already configured around similar dimensions, which helps maintain process consistency from job to job. The 600FT length also identified in the SAP description supports consistent color or pattern across longer runs, because multiple components can be edged from the same roll during production.

Common Questions About Rehau PVC Edgebanding 302254-229

Select Rehau PVC Edgebanding 302254-229 For Edge Work

The SAP description 15/16X1MM CP20844 LAC 600FT defines the size and designation of Rehau PVC Edgebanding 302254-229, giving clear parameters for planning edge work on cabinet and furniture projects. As an Edge Banding product from Rehau, Inc., offered through Wurth Baer Supply, it fits into woodworking shop workflows that rely on dependable edge treatments. Using the documented width, thickness, and length, installers can align this PVC edge banding to panel layouts and production runs that match those dimensions.