Rehau PVC edgebanding 302254-233 15/16 x 1mm 600FT

Rehau PVC Edgebanding 302254-233 For Clean Panel Edges

Rehau PVC edgebanding 302254-233 is a PVC edge banding that covers and protects raw board edges, giving casework, panels, and shelving a finished look that matches the surface design. The 15/16 inch width provides coverage across typical panel thicknesses with a margin, so installers can trim flush without exposing the substrate. The 1mm thickness gives the edge a solid feel and defined profile, supporting everyday use in cabinetry and furniture. Its CP20606 designation identifies the specific decor or color code, helping shops keep edge material matched to designated laminate or panel runs. The LAC reference in the description identifies a particular finish or surface treatment, so the edge appearance stays consistent across multiple jobs using that same specification. Supplied in a 600FT length, this single roll supports longer production runs, reducing roll changes during cutting and banding operations.

Key Rehau Edgebanding Details That Support Work

• The 15/16 inch width spans common panel thicknesses with extra edge, allowing flush trimming while still fully covering the board edge, which helps maintain a clean visual line along cabinet and furniture parts.
• The 1mm thickness provides a substantial edge profile, supporting routine handling of doors, drawer fronts, and shelves without a fragile edge feel along those traffic areas.
• PVC edge banding construction gives the product a unified material body, simplifying machining, trimming, and finishing steps as parts move through standard woodworking processes.
• The CP20606 identification in the description locks in a specific decor or pattern, which helps shops keep color and design matching consistent from job to job using that same code.
• The LAC reference ties to a defined finish variant, reducing variation across batches so cabinets and fixtures using this specification maintain a uniform appearance along every exposed edge.
• The 600FT roll length produces many parts from one roll, which supports efficient cutting plans and minimizes interruptions on manual or automatic edgebanding stations.

Edgebanding Size And Format For Straightforward Application

This Rehau PVC edgebanding is supplied in a continuous 600FT length, giving enough material for repeated cabinet, casework, or fixture runs without frequent material changes. The 15/16 inch width gives coverage beyond the face of typical panels, so banded parts can be trimmed back to the substrate for a tight joint. With a 1mm thickness, the material sets up well for standard edgebanding workflows, from manual edge banders to industrial lines. As a PVC edge banding, it aligns with common cutting, trimming, and scraping tools used in woodworking shops, helping maintain predictable results across different machines and setups.

Where Rehau Edge Banding 302254-233 Fits In Shop Work

Using 15/16 x 1mm PVC On Cabinet And Panel Edges

The 15/16 x 1mm format positions this Rehau PVC edge banding for use on cabinet sides, bottoms, tops, and shelving, where full edge coverage and a defined profile are needed. The extra width beyond typical panel thickness supports trimming on straight runs, corners, and ends, giving parts a square, finished edge once machining is complete. As an edge banding product in the edgebanding category, it is suited to closing off exposed composite or wood-based panel edges during casework fabrication. The CP20606 decor code ties this roll to a particular visual specification, aligning it with matching panel or laminate runs so shops can keep fronts, carcasses, and shelves visually coordinated along every exposed edge.

Why The 600FT Roll And Design Codes Matter In Production

The 600FT roll length allows this Rehau PVC edgebanding 302254-233 to run through extended production without roll changes, which supports steady throughput on edge banders and reduces setup breaks between jobs using the same specification. The 1mm PVC thickness works well with standard trimming and scraping tools, so operators can hold consistent pressure and cutting depths as they move from part to part. The CP20606 and LAC references in the description anchor color and finish selection, which helps maintain repeatable results on reorders when shops need to match existing installations or continue a series of projects. With Wurth Baer Supply listing this edge banding under the dedicated manufacturer part number 302254-233, buyers can reference a single identifier when reordering, supporting accurate replacement of the same decor, width, thickness, and roll length.

Common Questions About Rehau PVC Edgebanding 302254-233

Select Rehau PVC Edgebanding 302254-233 For Matched Edges

Rehau PVC edgebanding 302254-233 combines 15/16 inch width, 1mm thickness, CP20606 decor identification, and a 600FT roll length to support efficient cabinet and panel production. For projects calling for this exact Rehau specification, Wurth Baer Supply offers a clearly defined listing using the manufacturer part number 302254-233. Using the SAP description 15/16X1MM CP20606 LAC 600FT as a reference, buyers can align edge material with their established shop standards and repeat work with the same decor, size, and format.