Rehau PVC edgebanding 302254-279 15/16 in x 1mm

Rehau PVC Edgebanding 302254-279 For Clean Edges

Rehau PVC edgebanding 302254-279 is a PVC edge banding that finishes exposed panel edges so cabinet and furniture projects present a uniform, professional-looking edge. The 15/16 inch width covers typical 3/4 inch panels with enough margin to trim flush, which helps installers hide core material and minor alignment variation along the run. The 1mm thickness gives the edge a substantial feel without adding bulk, so doors and panels maintain their intended reveals while gaining improved edge protection. The CP40816 identification ties this edgebanding to a specific color and texture family, which supports consistent matches across multiple jobs using the same board design. The embossed lacquer surface provides a textured, finished face that visually coordinates with decorative surfaces while standing up better to day-to-day contact than an untreated PVC stripe.

Key Rehau Edge Banding Details For Job Planning

• The 15/16 inch width gives enough overhang on 3/4 inch stock, allowing trimming for a tight, clean edge line and helping reduce visible substrate on slightly uneven panel cuts.
• The 1mm thickness provides a defined, durable edge profile that feels solid in hand while still working smoothly with standard edge banding trimmers and routers on site or in the shop.
• The PVC construction creates a consistent, machinable strip that handles typical cabinet shop cutting and trimming processes while delivering a uniform color body along the entire length.
• The CP40816 designation identifies a specific decor match, so repeat orders for the same project line up visually with previous installations that used this same Rehau edge.
• The embossed lacquer surface adds light texture and a finished sheen that helps the edge blend with modern decorative panels and hides minor handling marks from installation.
• The 600FT reference defines a long-run format that supports production runs and multi-cabinet layouts without frequent changeovers, which helps streamline edging workflows.

Edgebanding Format Suited To Production Installation

This Rehau PVC edge banding is supplied as a continuous length identified as 600FT, which supports long cabinet or casework runs without frequent material splices. The 15/16 inch by 1mm format pairs with standard edgebanding machines and handheld trimmers, helping shops move from banding to trimming and final pass sanding in a familiar sequence. The PVC material works with typical gluing and pressing processes used for edgebanding, so crews can integrate it into existing lines that already handle similar PVC edges. The CP40816 embossed lacquer finish arrives ready for final trimming and light cleanup, which keeps the focus on accurate setup and cut quality instead of extra finishing passes on the edge itself.

Where Rehau 302254-279 Works And Why It Helps

PVC Edgebanding For Cabinet And Panel Edges

This Rehau PVC edgebanding, identified as 302254-279, serves as an edge treatment for cabinet, furniture, and panel projects that use sheet goods. The 15/16 inch width covers the face and a small portion of the back edge on common 3/4 inch materials, which helps create a balanced visual line on doors and case sides. With a 1mm thickness, the band produces a defined edge that resists everyday knocks better than very thin tape-style edging, which supports longer service life in frequently handled fronts. The CP40816 code ties the strip to a decor series, helping designers and shops repeat the same edge look across doors, drawer fronts, and carcass edges that share that surface design.

Details That Support Consistent, Repeatable Results

The PVC construction of this edge banding provides a uniform, predictable material for trimming, so blades and bits track consistently and installers can hold a steady reveal along full-length pieces. The embossed lacquer surface gives the edge a controlled texture that improves appearance while helping disguise small wave marks from trimming or sanding. Because the format is 15/16 inch by 1mm in a 600FT run, production teams can standardize machine setups around this size and run multiple jobs with fewer adjustments, which supports repeatable results from part to part. Using the CP40816 and 302254-279 identifiers together lets purchasing and shop staff align material orders with specific design programs, reducing color and texture variation across replacement fronts or add-on cabinets for the same project line.

Common Questions About Rehau PVC Edgebanding 302254-279

Select Rehau Edgebanding 302254-279 For Matching Projects

Rehau PVC edgebanding 302254-279 brings a 15/16 inch by 1mm PVC strip with an embossed lacquer CP40816 decor to cabinet and panel edges, so shops can align edge appearance with their chosen surface design while maintaining familiar processing steps on standard equipment.