Rehau PVC Edgebanding 302254-280 is an edge banding product from Rehau, Inc. that finishes exposed edges on boards and panels, so cabinet and furniture projects present a consistent, professional edge line. The SAP description "15/16X1MM CP20953 EMB LAC 600FT" identifies this as a 15/16 inch wide, 1mm thick PVC band, which suits applications using common 3/4 inch panels where a slight overhang is preferred for flush trimming. The PVC material gives a uniform surface along the edge, which supports a consistent appearance when matching to CP20953 EMB LAC finishes in a project run. The 600FT reference in the description indicates a long run length, which helps larger shops and repeat projects handle multiple parts and cabinets from a single roll, reducing changeovers during cutting and edgebanding operations.
The 15/16X1MM dimension in the SAP description defines the working format for installation, so operators can set guides and trimmers to a known width and thickness on their edgebanders or manual setups. The 15/16 inch width positions this edge banding well for standard 3/4 inch board edges, giving a workable margin for trimming back without starving the edge. The 1mm thickness informs pressure and trimming expectations, so installers can match cutter settings and feed rates to a mid-weight PVC profile during processing. The 600FT length reference supports planning for job runs, since production teams can estimate linear usage per cabinet and schedule change points around that long roll size.
This Rehau PVC edgebanding is identified in the product data as belonging to the Edge Banding product class and Edgebanding category, which positions it for use on exposed panel edges in woodworking environments such as cabinetry and casework. The 15/16 inch width noted in the SAP description aligns with edge coverage for many panel-based constructions using nominal 3/4 inch substrates, so it fits well on cabinet sides, shelves, and doors that require a finished edge. The 1mm thickness value signals a solid, mid-gauge band suitable for vertical and horizontal edges, supporting a more substantial feel compared to very thin tapes when doors and drawer fronts are handled repeatedly. The CP20953 EMB LAC finish code ties this band to a specific surface design reference, allowing shops that work with matching materials to maintain consistent visual alignment across doors, drawer fronts, and carcass parts using the same code.
Being described as PVC Edgebanding gives installers a predictable material type, so they can use standard PVC-capable edgebanders and trimming tooling for processing without changing to alternative material setups. The 15/16X1MM sizing in the SAP description drives fixture and tooling alignment, allowing operators to dial in guide fences and trimmers for this width and thickness to keep glue lines centered and edges uniform along the part. The 600FT indication supports workflow by reducing the number of roll changes on longer runs, which helps maintain setup consistency and surface quality over an entire job. The specific manufacturer part number 302254-280 gives purchasing and production a clear identifier to repeat orders for the same edge profile, which helps maintain continuity when projects extend over time or when replacement parts are needed for later work using the same design code.
Rehau PVC Edgebanding 302254-280 is an edge banding product in the Edge Banding class, used to finish exposed panel edges so cabinets and casework have a clean, uniform perimeter.
This Rehau edge banding is identified as 15/16X1MM, meaning it is 15/16 inch wide and 1mm thick, which suits typical 3/4 inch panels with a margin for trimming to a flush edge.
The CP20953 EMB LAC text in the SAP description identifies a specific finish designation, helping shops select edgebanding that aligns with panels or laminates using the same code.
The SAP description lists 600FT, indicating a 600-foot length, which supports longer production runs and reduces the frequency of roll changeovers on edgebanding equipment.
This 302254-280 PVC edgebanding is manufactured by Rehau, Inc., which provides consistent part numbering so purchasing and production can repeatedly source the same edge profile.
The product is listed under the Edgebanding category and Edge Banding product class, positioning it for finishing panel edges in woodworking jobs such as cabinets and furniture.
This Rehau PVC Edgebanding, part number 302254-280, provides a 15/16X1MM format with a CP20953 EMB LAC finish reference and a 600FT length, giving shops a defined, repeatable edge solution. The alignment of brand, dimensions, finish code, and part number supports consistent ordering and setup across projects where the same edge profile is required. For woodworking operations that rely on predictable sizing and finish references in edge banding, this Rehau PVC option offers a clearly identified choice for use on panel-based constructions.
Sold In: 1 Roll