Rehau PVC edgebanding 302254-286 is a PVC edge banding product from Rehau, Inc. that finishes exposed panel edges so they present a uniform, usable surface. The 15/16 inch width covers standard panel thickness with room for trimming, giving installers working tolerance when running parts. The 1mm thickness provides a defined edge profile that can be machined consistently, which supports repeatable setups on edgebanders or manual trimmers. The CP41177 designation and EMB LAC description identify the specific decor and surface, helping shops keep material matched across projects when reordering. Supplied as a 600FT length, this Rehau PVC edgebanding supports longer production runs on casework or closets without frequent coil changeover. Classified under edge banding, it fits directly into a woodworking or cabinet fabrication workflow where exposed substrate edges need a PVC finish.
This Rehau PVC edgebanding is identified as 15/16X1MM, so it is sized for panel edges where a roughly 1 inch wide band is appropriate. That width lets installers center the band over the substrate and trim both sides, which supports accurate alignment on cabinet components. The 1mm thickness defines how it will sit proud before trimming and scraping, influencing machine settings and hand tools used in finishing. Classified in the edge banding product class, it is intended for edge treatment of sheet goods rather than surface lamination, which keeps it focused on covering exposed edges in woodworking applications.
The 15/16 inch width of Rehau PVC edgebanding, 302254-286, suits panel edges on cabinets, casework, and similar assemblies where the substrate edge needs a PVC finish. This width spans common panel thicknesses while leaving trim allowance, so it works well when processing parts that will be flush-trimmed after application. The 1mm thickness provides a substantial edge that can be scraped and profiled, which supports use on visible cabinet fronts, shelves, and vertical panels where the edge line is in direct view. With a 600FT length designation, this edgeband is geared toward shop environments handling multiple cabinets or longer runs rather than single-piece repair, supporting continuous feed on production equipment.
The 15/16X1MM sizing helps set up edgebanders and trimmers, because the operator knows the band will overhang slightly on each side of a standard panel, reducing the risk of under-coverage during feed. The 1mm thickness keeps the edge uniform across the roll, which is important for maintaining cutter and scraper settings from one job to the next. The CP41177 EMB LAC description and 302254-286 part number give a stable identifier for the specific look, so replacement pieces match existing runs when a shop repeats a project. As a PVC edge banding under the Rehau brand, this strip aligns with woodworking workflows that already handle PVC edgebanding material, supporting consistent handling, storage, and machining in a cabinet or millwork shop.
Rehau PVC edgebanding 302254-286 is identified as 15/16X1MM, meaning it is approximately 15/16 inch wide and 1mm thick, which guides panel edge coverage and trimming setup.
The Rehau 302254-286 product is described as PVC edgebanding, so it is a PVC edge banding material suited to workflows that use standard PVC edgebanding equipment.
The SAP description lists 600FT, indicating this Rehau PVC edgebanding provides 600 feet of material for extended cabinet or casework production runs.
The CP41177 EMB LAC wording in the description identifies the specific decor and surface variant of the Rehau PVC edgebanding, helping shops match appearance across repeat jobs.
This item is listed in the Edge Banding product class and Edgebanding category, so it is intended for finishing exposed panel edges in woodworking and cabinet applications.
The manufacturer part number for this Rehau PVC edgebanding is 302254-286, which lets shops reference the exact product when reordering for consistent results.
Rehau PVC edgebanding 302254-286 combines a 15/16 inch width, 1mm thickness, and 600FT length to support cabinet and casework production where PVC edge treatment is required. Using the CP41177 EMB LAC and 302254-286 identifiers, shops can align this edge banding with existing projects or standard finishes and keep panel edges consistent across runs.
Sold In: 1 Roll